View 112-102EAJ-B01_254392.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Commercial
Switches and Sensors
Pressure Mass Airflow Force Humidity
Product solutions on the Interactive Catalogue
Temperature - RTDs Temperature - Thermistors Temperature - Probes Thermostats - Commercial Thermostats - Precision Heaters Combi-sensor Thermal Cutoffs Position Infrared Current Liquid Level Basic Switches
February 2004
INTRODUCTION COMMERCIAL SWITCHES AND SENSORS
Honeywell's Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment; heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue contains a selection of our most popular, established product listings - all tried and tested in field applications. To view our complete range of products, visit our website at www.honeywell.com/sensing.
How to use this catalogue
For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These listings illustrate our capabilities while the specifications included allow easy differentiation between similar products. For products with no specific reference numbers, please contact your local Honeywell sales office.
System critical sensing solutions
A system is critical if the quality, reliability, delivery and customer service associated with a component part is essential to the performance of the operation or end product. If a sensor or switch is critical to the performance, cost effectiveness, delivery or safety of a product or operation, then it is system critical. It is therefore a defining element in the performance of the system under whatever conditions apply. Failure of the component - or failure of delivery of the component - results in lost productivity, increased costs or a catastrophic event such as a shutdown. Therefore selecting the right product is essential. It can make the difference between success and failure.
There are, of course, many more product options available. Full product specification information may be accessed on our website (www.honeywell.com/sensing). At the Home page enter the catalogue listing reference in the SEARCH box and click GO! This will take you directly to the interactive catalogue/specification search tables for this listing. Alternatively, select and click the interactive catalogue icon on the Home page and then choose a product category against which to do a specification search.
Honeywell - delivering excellence
To deliver the right products for our customers' applications we listen to them to understand their needs. Using techniques such as "Voice of the Customer" and "Concept Engineering" we make sure that the products and solutions we deliver are the right ones. As part of Honeywell we can use local knowledge and understanding combined with global expertise and resources to achieve this. We can deploy many key technologies to bring innovative solutions to customers' problems.
Also on the website you can access installation instructions, application notes, Frequently Asked Questions (FAQs), selection guides and additional technical information.
Mounting dimensions
Mounting dimensions shown in each product section are for reference only. For exacting layout work, request an engineering drawing from your nearest Honeywell sales office. Where dual dimensions are shown on mounting drawings, the first or upper one is millimetres (mm) and the second or lower is inches (in). Where single dimensions are shown, they are millimetres (mm), unless otherwise stated.
Our products are manufactured to work well and to last. We use Six Sigma Plus productivity to ensure this is the case. We have award winning manufacturing facilities around the world and recognised world class business excellence in manufacturing and supply chain management to deliver on time, anywhere in the world.
To order these products
Simply contact your local Honeywell Distributor or your local Honeywell office. More information on Honeywell products and how to contact us can be found at http://locator.micro.honeywell.com/
Our e-business approach offers instant access to product information, technical support and application knowledge through our Internet site. Check out our powerful new interactive catalogue that can search and find the right products for customers' needs and deliver a drawing ready for incorporation in a CAD system direct to your desk.
And of course, we manage our whole business for the benefit of our customers, using an acknowledged world-class business excellence approach that incorporates Six Sigma principles.
2
www.honeywell.com/sensing
CONTENTS CONTENTS
Pressure Sensors
Page 4
Thermostats - Precision
Page 31
Absolute, differential, gauge, and vacuum gauge pressure sensors for media that are compatible with a silicon diaphragm. These sensors are ideal for low-cost commercial grade applications, such as printed circuit boards. Small and reliable, they offer excellent repeatability and high accuracy under varying environmental conditions.
Hermetic and non-hermetic thermostats in standard and custom packages for use in a wide variety of precision applications.
Heaters
Page 37
Mass Airflow Sensors
Page 10
Wire-wound, chemically-etched, high temperature and transparent heaters in a variety of sizes and geometries.
Amplified and unamplified microbridge mass airflow sensors provide a sensitive and fast response and high accuracy over a broad range of gas and air flows.
Combi-sensor
Page 39
Force Sensors
Page 13
Liquid pressure/temperature sensor that uses piezoresistive and thermistor sensing technology to measure water pressure and temperature.
Compact, extremely sensitive devices for precise, reliable performance in any application that requires precision force measurement.
Thermal Cutoffs
Page 40
Humidity Sensors
Page 15
Dependable organic thermal cutoffs in temperatures ranging from 72 C to 240 C [162 F to 464 F]. They are available in various lead lengths and configurations.
Relative humidity sensors with on-chip signal conditioning. Chemically resistant packaging to accommodate harsh environments. Sensor construction consists of a planar capacitor with a second polymer layer to protect against dirt, dust, oils and other hazards.
Position Sensors
Page 42
Hall effect and magnetoresistive sensors for all applications that require accurate, reliable outputs.
Temperature Sensors - RTDs
Page 16
Platinum and silicon-based thin film resistance temperature devices (RTDs) for applications that require small package size, accuracy and linear outputs.
Infrared Products
Page 46
Optoelectronic standard infrared emitting diodes (IREDs), sensors and assemblies for object presence, limit and motion sensing, position encoding and movement encoding.
Temperature Sensors - Thermistors
Page 18
Precision Hi-Rel negative temperature coefficient (NTC) thermistors and positive temperature coefficient (PTC) thermistors for use in a broad variety of temperature measurement and control applications.
Current Sensors
Page 52
Adjustable linear null balance, digital and linear output current sensors for monitoring ac or dc current.
Temperature Sensors - Probes
Page 24
Liquid Level Sensors
Page 56
A variety of customized probes for use in the automotive and other industries.
Sensitive sensors in a variety of housing types for detecting the presence or absence of a wide range of liquids.
Thermostats - Commercial
Page 27
Basic Switches
Page 57
Dependable bimetal thermostats include choice of automatic or manual reset, phenolic or ceramic housings, and a variety of mounting brackets and terminal options.
Standard, miniature and subminiature switches, available in a range of enclosures and with a variety of actuators. They are ideal for use alone or built into assemblies.
WARNING ! MISUSE OF DOCUMENTATION * The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.
WARNING ! PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury Failure to comply with these instructions could result in death or serious injury.
www.honeywell.com/sensing
3
PRESSURE
Pressure Sensors
Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability, high accuracy, and reliability under varying environmental conditions. In addition, they feature highly consistent operating characteristics from one sensor to the next and interchangeability without recalibration. We offer three pressure sensor measurement types--absolute, differential and gauge--including vacuum gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified and unamplified versions, are available. Honeywell pressure sensors are best used in applications which require precision pressure measurement.
24PC/26PC Series
Signal conditioning: Unamplified noncompensated- (24PC Series) compensated - (26 PC Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC Series) 16 Vdc max. (26PC Series) Operating temperature: -40 C to 85 C -40 F to 185 F Port style: Straight or Flow Through Termination: PCB; 1 x 4; 0.600 in (Type 6) PCB; 2 x 2; (Type 2) 1 x 4 with connector (Type 5)
Gauge
MOUNTING DIMENSIONS (for reference only) mm/in
GAUGE SENSOR 1 x 4 Termination (Style 6) Port Style A, Straight Pin 1 is notched, Pin 2 is next to Pin 1, etc.
Flow Through Type 6
OPTIONS
Differential
MOUNTING DIMENSIONS (for reference only) mm/in DIFFERENTIAL SENSOR
1 X 4 Termination (Style 6) Port Style A, Straight (Only)
24PC Series
MEASUREMENT TYPE Gauge/Vacuum Gauge Differential/Vacuum Gauge Gauge/Vacuum Gauge Differential/Vacuum Gauge Gauge/Vacuum Gauge Differential/Vacuum Gauge Gauge/Vacuum Gauge Differential Gauge Differential Gauge PRESSURE RANGE 1.0 psi 5.0 psi 5.0 psi 15.0 psi 15.0 psi 30.0 psi 30.0 psi 0.5 psi 0.5 psi 100 psi 100 psi REFERENCE 24PCAFA6G 24PCBFA6D 24PCBFA6G 24PCCFA6D 24PCCFA6G 24PCDFA6D 24PCDFA6G 24PCEFA6D 24PCEFA6G 24PCFFA6D 24PCFFA6G
24PC Series
MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 15.0 psi Flow Through/Vacuum Gauge 30.0 psi REFERENCE 24PCCFG6G 24PCDFG6G
26PC Series
MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 1.0 psi Flow Through Gauge/Vacuum Gauge 15.0 psi 100 psi REFERENCE 26PCAFG6G 26PCCFG6G 26PCFFG6G
26PC Series
MEASUREMENT TYPE Differential/Vacuum Gauge Gauge/Vacuum Gauge Differential Gauge Differential/Vacuum Gauge Gauge/Vacuum Gauge Differential Gauge Gauge Differential PRESSURE RANGE 1.0 psi 1.0 psi 5.0 psi 5.0 psi 15.0 psi 15.0 psi 30.0 psi 30.0 psi 100 psi 250 psi REFERENCE 26PCAFA6D 26PCAFA6G 26PCBFA6D 26PCBFA6G 26PCCFA6D 26PCCFA6G 26PCDFA6D 26PCDFA6G 26PCFFA6G 26PCGFA6D
4
www.honeywell.com/sensing
PRESSURE
24PC/26PC Series (Continued)
Type 2
24PC/26PC SMT (Surface Mount Technology)
Signal conditioning: Unamplified noncompensated- (24PC SMT Series) compensated - (26 PC SMT Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC SMT Series) 16 Vdc max. (26PC SMT Series) Operating temperature: -40 C to 85 C -40 F to 185 F Port style: Straight, 1,88 mm O (0.74 in) Termination: SMT solder Measurement type: Gauge, Vacuum Gauge, Differential, Wet/Wet Differential
CPC/CPX Series Low Pressure
Unamplified compensated - (CPC Series) noncompensated - (CPX Series) Supply voltage: 12 Vdc typ. 16 Vdc max. Operating temperature: -25 C to 85 C -13 F to 185 F Port style: Barbed Termination: PCB Accuracy grade: Commercial (1.0 %) Signal conditioning:
26PC Series
MEASUREMENT TYPE Flow Through PRESSURE RANGE 30.0 psi REFERENCE 26PCDFG2G
OPTIONS
CPC Series
MEASUREMENT TYPE Differential Gauge Differential PRESSURE RANGE (1.0 psi) 4.0 in H2O (1.0 psi) 4.0 in H2O (1.0 psi) 10.0 in H2O REFERENCE CPCL04DFC CPCL04GFC CPCL10DFC
Type 5
OPTIONS
24PC SMT Series
PRESSURE RANGE 0 psi to 1.0 psi 0 psi to 5.0 psi 0 psi to 15.0 psi REFERENCE 24PC01SMT 24PC05SMT 24PC15SMT
CPX Series
MEASUREMENT TYPE Differential Differential PRESSURE RANGE 4.0 in H2O 10.0 in H2O REFERENCE CPXL04DF CPCL10DF
26PC SMT Series 26PC Series
MEASUREMENT TYPE PRESSURE RANGE Flow Through/Vacuum Gauge 100 psi REFERENCE 26PCFFU5G PRESSURE RANGE 0 psi to 1.0 psi 0 psi to 5.0 psi 0 psi to 15.0 psi REFERENCE 26PC01SMT 26PC05SMT 26PC15SMT
www.honeywell.com/sensing
5
PRESSURE
DC Series, Low Pressure
Signal conditioning: Amplified compensated unregulated (DC001NDC4) regulated (DC005NDR4) 5 Vdc typ., 5.1 Vdc max. (DC001NDC4) 7 Vdc to 35 Vdc (DC005NDR4) -25 C to 85 C -13 F to 185 F Barbed PCB
DCXL/DUXL Series, Low Pressure
Signal conditioning: Unamplified compensated (DCXL) noncompensated (DUXL) 12 Vdc typ., 16 Vdc max. (DCXL) 4.5 Vdc min., 8 Vdc max. (DUXL) -25 C to 85 C -13 F to 185 F Barbed PCB
Supply voltage: Operating temperature: Port style: Termination:
Supply voltage: Operating temperature: Port style: Termination:
OPTIONS
DC001NDC4
OPTIONS
DCXL Series
MEASUREMENT TYPE Differential
PRESSURE RANGE 1.0 in H2O
REFERENCE DC001NDC4
MEASUREMENT TYPE Differential Differential
PRESSURE RANGE 1.0 in H2O 10.0 in H2O
REFERENCE DCXL01DN DCXL10DN
DC005NDR4
DUXL Series
MEASUREMENT TYPE Differential
PRESSURE RANGE 5.0 in H2O
REFERENCE DC005NDR4
MEASUREMENT TYPE Differential Differential
PRESSURE RANGE 1.0 in H2O 10.0 in H2O
REFERENCE DUXL01D DUXL10D
6
www.honeywell.com/sensing
PRESSURE
XCA Series
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Amplified compensated 5 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB
XPC Series
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Accuracy grade: Unamplified compensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB Commercial (1.0 %)
MEASUREMENT TYPE Absolute
PRESSURE RANGE 15.0 psia
REFERENCE XCA415AN
XCX Series
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Accuracy grade: Unamplified compensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C -13 F to 185 F Barbed PCB Commercial (1.0 %)
MEASUREMENT TYPE Differential Differential
PRESSURE RANGE 1.0 psi 15.0 psi
PORT STYLE Axial Radial
REFERENCE XPC01DFC XPC15DTC
XSX Series, Low pressure
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Accuracy grade: Unamplified uncompensated 12 Vdc typ., 16 Vdc max. -25 C to 85 C [-13 F to 185 F] Button PCB Commercial (1.0 %)
MEASUREMENT TYPE Differential Differential Differential
PRESSURE RANGE 1.0 psi 1.0 psi 15.0 psi
ACCURACY GRADE High (0.50 %)
REFERENCE XCX01DNC XCX01DNH XCX15DNC
MEASUREMENT TYPE Gauge
PRESSURE RANGE 4.0 in H2O
REFERENCE XSXL04GF
www.honeywell.com/sensing
7
PRESSURE
ASDX Series
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Accuracy grade: Amplified compensated 4.75 Vdc to 5.25 Vdc -20 C to 105 C [-4 F to 221 F] Taper 2,29 mm [0.090 in] PCB 2.0 %
40PC Series, Miniature Signal Conditioned
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Amplified 5 Vdc 0.25 Vdc -45 C to 125 C -49 F to 257 F Straight for O-ring interface PCB, unformed
A2 Package
MEASUREMENT TYPE Absolute Absolute Absolute
PRESSURE RANGE 0 psi to 15 psi 0 psi to 30 psi 0 psi to 100 psi
REFERENCE ASDX015A24R ASDX030A24R ASDX100A24R
D4 Package
MEASUREMENT TYPE Bi-Directional Gauge/Vacuum Gauge Gauge Vacuum Gauge Gauge Gauge Gauge Gauge Gauge PRESSURE RANGE 50 MM HG 0 to 300 mm HG 0 to -15.0 psi 15.0 psi 30.0 psi 100 psi 150 psi 250 psi 500 psi REFERENCE 40PC001B1A 40PC006G1A 40PC015V1A 40PC015G1A 40PC030G1A 40PC100G1A 40PC150G1A 40PC250G1A 40PC500G1A
MEASUREMENT TYPE Differential/gauge Differential/gauge Differential/gauge Differential/gauge Differential/gauge
PRESSURE RANGE 0 psi to 1 psi 0 psi to 5 psi 0 psi to 15 psi 0 psi to 30 psi 0 psi to 100 psi
REFERENCE ASDX001D44R ASDX005D44R ASDX015D44R ASDX030D44R ASDX100D44R
G2 Package
MEASUREMENT TYPE Guage Guage Guage Guage Guage
PRESSURE RANGE 0 psi to 1 psi 0 psi to 5 psi 0 psi to 15 psi 0 psi to 30 psi 0 psi to 100 psi
REFERENCE ASDX001G24R ASDX005G24R ASDX015G24R ASDX030G24R ASDX100G24R
8
www.honeywell.com/sensing
PRESSURE
140PC Series
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Amplified 8 Vdc typ., 16 Vdc max. -40 C to 85 C -40 F to 185 F Straight PCB
160PC Series, Low Pressure
Signal conditioning: Supply voltage: Operating temperature: Port style: Termination: Amplified 8 Vdc typ., 16 Vdc max. -40 C to 85 C -40 F to 185 F Straight PCB
Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent.
MEASUREMENT TYPE Gauge/Vacuum Gauge Differential/Vacuum Gauge Gauge Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge Gauge Absolute Absolute Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge PRESSURE RANGE -15 psi 1.0 psi 1.0 psi 2.0 psi 5.0 psi -39 in H2O to 55 in H2O 5.0 psi 15 psia 15 psia 15 psi 2.5 psi 5.0 psi Leadwire TERMINATION REFERENCE 141PC15G 142PC01D 142PC01G 142PC02G 142PC05D 142PC05D97 142PC05G 142PC15A 142PC15AW95 142PC15G 143PC03D 143PC05DW
Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent.
MEASUREMENT TYPE Differential/Vacuum Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge Differential/Vacuum Gauge PRESSURE RANGE 0 to 27.68 in H2O 5.0 in H2O -20 cm to 120 cm H2O -20 cm to 120 cm H2O 2,5 in H2O 10.0 in H2O 5,0 in H2O SUPPLY VOLTAGE REFERENCE 162PC01D 163PC01D36 163PC01D48 163PC01D61 163PC01D75 164PC01D37 164PC01D76
5 Vdc
Leadwire
www.honeywell.com/sensing
9
MASS AIRFLOW
Mass Airflow Sensors
Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably sensitive, fast, small. Used wherever airflow needs to be measured. Supply voltage: Operating temperature: Media compatibility: 8 Vdc to 15 Vdc -25 C to 85 C (-13 F to 185 F) Dry gas only
AWM2000 Series
The AWM2000 Series microbridge mass airflow sensor is a passive device comprised of two Wheatstone bridges and has bidirectional sensing capability. The heater control circuit is required for operation per specifications. The sensing bridge supply circuit is also required for operation per specifications. These two circuits are not on board the package and must be supplied in the application. The differential amplifier is a useful interface for the sensing bridge. It can be used to introduce gain and to voltage offsets to the sensor output. Signal conditioning: Unamplified (-44,5 mVdc to 44,5 mVdc) Port style: Straight Sensor resistance: 5 kOhm
AWM3000 Series
Like the AWM2000 Series, the dual Wheatstone bridges control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package. Signal conditioning: Port style: Amplified (1 Vdc to 5 Vdc) Straight
AWM40000 Series
The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow is directed across the surface of the sensing elements. Output voltage varies in proportion to the mass air or other gas flow through the inlet and outlet ports of the package. The specially designed housing precisely directs and controls the airflow across the microstructure sensing element. Mechanical design of the package allows it to be easily mounted to printed circuit boards. The microbridge mass airflow sensor has a unique silicon chip based on advanced microstructure technology. It consists of a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. Dual sensing elements positioned on both sides of a central heating element indicate flow direction as well as flow rate. Laser trimmed thick film and thin film resistors provide consistent interchangeability from one device to the next. Port style: Manifold
FLOW/PRESSURE RANGE 200 sccm + 2.0 in H20 (5 mBar) 1000 sccm (1 SLPM)
REFERENCE AWM3100V AWM3200V AWM3300V
FLOW/PRESSURE RANGE 200 sccm 4.0 in H2O (10 mBar) 1000 sccm (1 SLPM)
REFERENCE AWM2100V AWM2200V AWM2300V
SIGNAL CONDITIONING Unamplified (8.5 mV) Unamplified (54.7 mV) Amplified (1 Vdc to 5 Vdc) Amplified (1 Vdc to 5 Vdc)
FLOW/ PRESSURE RANGE 25 sccm 1000 sccm (1 SLPM) 1000 sccm (1 SLPM) + 6 SLPM
REFERENCE AWM42150VH AWM42300V AWM43300V AWM43600V
10
www.honeywell.com/sensing
MASS AIRFLOW
AWM5000 Series - High flow
AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25 inches H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging. The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows 100 g of shock without compromising performance. The included "AMP" compatible connector provides reliable connection in demanding applications. Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser. Signal conditioning: Port style: Amplified (1 Vdc to 5 Vdc) Threaded, 1/4 NPT
FLOW/PRESSURE RANGE 0 SLPM to 5 SLPM (N2 calibration) 0 SLPM TO 10 SLPM (N2 calibration) 0 SLPM to 20 SLPM (CO2 calibration) 0 SLPM to 20 SLPM (N2 calibration)
REFERENCE AWM5101VN AWM5102VN AWM5104VC AWM5104VN
AWM700 Series
AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute (SLPM) while inducing a pressure drop of 1 inch H2O, typically. The AWM700 has a high flow range capability in a small package. Signal conditioning: Port style: Amplified (1 Vdc to 5 Vdc) Tapered, 22 mm
CAUTION
PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor.
FLOW/PRESSURE RANGE + 200 SLPM REFERENCE AWM720P1
Failure to comply with these instructions could result in product
www.honeywell.com/sensing
11
MASS AIRFLOW
AWM90000 Series
The AWM90000 Series microbridge mass airflow sensors are available in two versions, mass flow and differential pressure. The AWM92100V has a flow range of 200 sccm with a pressure drop of only 0.49 mBar, typically. The AWM92200V is a differential pressure version that has a range of 2 in H2O. The AWM90000 Series has a 1 ms response time, operates with a supply voltage from 8.0 Vdc to 15.0 Vdc, while consuming only 50 mW of power. The compact plastic package will withstand a maximum overpressure of 25 psi without compromising performance. Signal Conditioning: Port Style: Unamplified Straight
NOTICE
LAMINAR FLOW Due to the fast response time of the sensor, these specifications were generated using laminar flow. Airflow instability or "turbulence" present in the airstream will result in an increase in measurement uncertainty. The turbulent flow problem can be corrected by either straightening the airflow using flow laminarizing or by slowing the response of the sensor using a simple RC time constant on the output of the sensor. This, of course, slows down the sensor response time. The values needed depend on the amount of turbulence present in the application. Several techniques for laminarizing the flow include adding hex shaped honeycombs, foam, screen materials or adding constrictors (frits) to the flow stream. There are various commercial laminar flow elements that can be purchased. Unfortunately the greater the efficiency of the laminarizer, the greater the increase in pressure drop in order to establish a given flow rate. Plastic honeycomb material probably gives the most improvement for the least pressure drop. In any test fixture, the avoidance of sharp radii is an absolute requirement.
FLOW RANGE (FULL SCALE) 200 sccm --
PRESSURE RANGE -- 2.0 H2O (5 mBar)
REFERENCE AWM92100V AWM92200V
CAUTION
PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. Failure to comply with these instructions could result in product
12
www.honeywell.com/sensing
FORCE
FORCE
Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when the resistors flex under any applied force. The sensor concentrates force from the application, through the stainless steel plunger, directly to the silicon sensing element. The amount of resistance changes in proportion to the amount of force being applied. This change in circuit resistance results in a corresponding mV output level.
Force Sensors
FSG Series
Plunger actuator - Force range 1500 g
Supply voltage: Operating temperature: Sensitivity: Overforce: 360 mV span @ 10 Vdc -40 C to 85 C -40 F to 185 F 0.20 mV/g min., 0.24 mV/g typ., 0.28 mV/g max. 5500 g
FSL Series
Ball bearing actuator - Force range 500 g
Supply voltage: Operating temperature: Sensitivity: Overforce: 60 mV span @ 5 Vdc -40 C to 85 C -40 F to 185 F 0.10 mV/g min., 0.12 mV/g typ., 0.14 mV/g max. 4500 g
Non-compensated
REFERENCE FSG15N1A
Non-compensated
REFERENCE FSL05N2C
www.honeywell.com/sensing
13
FORCE
Model 1865 Force/Pressure Transducer
The Model 1865 is a high-performance transducer specifically designed to address the needs of medical and specialized OEM applications. Offering laser-trimmed compensation, the Model 1865 may be specified to operate with either a constant current or voltage supply. The Model 1865 employs a solid state piezoresistive pressure transducer mounted in a plastic package. For applications where force is applied by a flexible membrane to the sensor, such as found in infusion pumps, the Model 1865's precision height silicone diaphragm provides long life and is a reliable replacement for older force or load cell transducers. Utilizing a silicon rubber diaphragm, the 1865 is compatible with some liquid media applications. The Model 1865 may be operated in either current or voltage excitation, and its output may be amplified or signal conditioned, as required. The semiconductor-based sensor offers high resolution using its Wheatstone Bridge strain gauge design. The height of the unit's patented, poured-in-place silicon rubber diaphragm is controlled to ensure sensitivity to low pressure. This diaphragm is bonded to a plastic header and transmits force applied through a special silicone gel to the diaphragm of a silicon peizoresistive die. The back of the die is exposed to atmospheric pressure, which results in a gauge pressure output. Pressure over-range protection: 3X span or 60 psi, whichever is least Media/materials compatibility Top side: Room atmosphere, directly applied force, and liquids compatible with dimethyl silicon, polyetherimide (Ultem) Bottom side: Non-corrosive dry gasses and fluids compatible with silicon, pyrex, RTV silicone, and ceramic Sensor: Gauge pressure Diaphragm: Dimethyl silicone Compensation: Laser trimmed normalised output
OPTIONS
Excitation 1.5 mA
PRESSURE 0 psi to 5 psi 0 psi to 10 psi 0 psi to 15 psi 0 psi to 25 psi 0 psi to 30 psi REFERENCE 1865-01G-L-N 1865-02G-L-N 1865-03G-L-N 1865-04G-L-N 1865-05G-L-N
Excitation 10 Vdc
PRESSURE 0 psi to 5 psi 0 psi to 10 psi 0 psi to 15 psi 0 psi to 25 psi 0 psi to 30 psi REFERENCE 1865-01G-K-N 1865-02G-K-N 1865-03G-K-N 1865-04G-K-N 1865-05G-K-N
14
www.honeywell.com/sensing
HUMIDITY
Humidity Sensors
Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide on-chip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that interacts with platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable, low drift performance. Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves 2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 C to 85 C (-40 F to 185 F) to accommodate harsh environments. Supply voltage: Operating humidity range: Operating temperature range: 4.0 Vdc to 5.8 Vdc 0 to 100% RH, non-condensing -40 C to 85 C (-40 F to 185 F)
HIH Series
OPTIONS
HIH-3610 Monolithic integrated circuit
The HIH-3610 humidity sensor is designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or other device is made possible by this sensor's linear voltage output. With a typical current draw of only 200 A, the HIH-3610 is ideally suited for low drain, battery powered systems. Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available. The HIH-3610 delivers instrumentation quality RH sensing performance in a low cost, solderable SIP (Single In-line Package). Available in two lead spacing configurations, the RH sensor is a laser trimmed thermoset polymer capacitive sensing element with on-chip integrated signal conditioning. Package style:
4,27 (0.168) 4,27 (0.168) 2,03 (0.080)
HIH-3602 Monolithic integrated circuit
HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both relative humidity and temperature sensing in a TO-5 housing with a hydrophobic sintered stainless steel filter. The temperature sensor is thermally connected with the RH sensor making the HIH-3602-A/C ideal for measuring dew point and other absolute moisture terms. Package style: Termination: Nist Certification: TO-5 can 0,46 mm (0.18 in) NIST Calibration sensor-specific printout
Solderable SIP
9,47 (0.373)
1,90 (0.075)
9,47 (0.373)
12,70 MIN (0.50)
12,19 MIN (0.480)
OUT
+
3X 0,38 (0.015) 2,54 (0.100) 2,54 (0.100)
OUT
+
3X 0,38 (0.015)
TEMPERATURE SENSOR 100 kOhm 5 % @ 25 C, NTC 0-50 C 1000 Ohm 0.2 % @ 0 C, platinum RTD
REFERENCE HIH-3602-A HIH-3602-C
1,27 (0.050)
5,08 (0.200)
HIH-3602-L Integrated circuit
The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation quality RH sensing performance in a rugged, low cost, slotted TO-39 housing. On-board signal conditioning reduces product development times while a typical current draw of only 200 A makes the HIH-3602-L perfect for battery powered systems. This sensor should be shielded from bright light. Package style: Termination: Nist Certification: T0-39 can 0,46 mm (0.18 in) None
TERMINATION 2,54 mm (0.100 in) Lead Pitch 1,27 mm (0.050 in) Lead Pitch 2,54 mm (0.100 in) Lead Pitch 1,27 mm (0.050 in) Lead Pitch
NIST CERTIFICATION None None NIST Calibration sensor-specific printout NIST Calibration sensor-specific printout
REFERENCE HIH-3610-001 HIH-3610-002 HIH-3610-003 HIH-3610-004
CAUTION
PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage
REFERENCE HIH-3602-L
www.honeywell.com/sensing
15
TEMPERATURE - RTDS
Temperature Sensors RTDs
Honeywell's thin film RTD (Resistance Temperature Detector) temperature sensors feature two distinct series. These sensors are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast. The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 C. Temperature range of -40 C to 150 C. The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature ranges of -200 C to 540 C.
HEL-700 Series 100/1000 Ohm platinum RTD
Supply voltage: Base resistance and interchangeability: 4 Vdc to 9 Vdc 1000 2 Ohm ( 0.2 %) @ 0 C (Standard) 1000 1 Ohm ( 0.1 %) @ 0 C (Optional)
100 Ohm (0.00385 Ohm/Ohm/C DIN standard)
PACKAGING STYLE Type A Type A Type B Type B BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional Standard Optional REFERENCE HEL-700-T-0-A HEL-700-T-1-A HEL-700-T-0-B HEL-700-T-1-B
OPTIONS
HEL-700
Temperature range: Packaging style/Termination: -200 C to 540 C -300 F to 1000 F Radial chip/ribbon leads (Type A) Radial chip/no leads (Type B) SMT (Axial) flip chip/no leads (Type C)
1000 Ohm (0.00375 Ohm/Ohm/C)
PACKAGING STYLE Type A Type A Type B Type B Type C Type C BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional Standard Optional Standard Optional REFERENCE HEL-700-U-0-A HEL-700-U-1-A HEL-700-U-0-B HEL-700-U-1-B HEL-700-U-0-C HEL-700-U-1-C
Type A
Type B
Type C
Centre lead not connected
CAUTION
PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage
16
www.honeywell.com/sensing
TEMPERATURE- RTDS
HEL-700 Series 100/1000 Ohm platinum RTD (Continued)
HEL-705/707/711/712/716/717
Temperature range: HEL-705/711/716 HEL-707/712/717 Packaging style: Termination: NIST calibration: -200 C to 260 C -320 F to 500 F -75 C to 540 C -100 F to 1000 F Ceramic case 12 in leadwires None
TD Series 2000 Ohm silicon RTD
Supply voltage: Temperature range: 10 Vdc -40 C to 150 C -40 F to 302 F
OPTIONS
TD4A Liquid temperature sensor
PACKAGING STYLE Threaded aluminium case
TERMINATION Leadwires
REFERENCE TD4A
TD5A Subminiature temperature sensor
100 Ohm (0.00385 Ohm/Ohm/C DIN standard)
BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional Standard Optional Standard Optional Standard Optional Standard Optional Standard Optional REFERENCE HEL-705-T-0-12-00 HEL-705-T-1-12-00 HEL-707-T-0-12-00 HEL-707-T-1-12-00 HEL-711-T-0-12-00 HEL-711-T-1-12-00 HEL-712-T-0-12-00 HEL-712-T-1-12-00 HEL-716-T-0-12-00 HEL-716-T-1-12-00 HEL-717-T-0-12-00 HEL-717-T-1-12-00 PACKAGING STYLE Plastic case TERMINATION SIP REFERENCE TD5A
1000 Ohm (0.00375 Ohm/Ohm/C)
BASE RESISTANCE AND INTERCHANGEABILITY Standard Optional Standard Optional Standard Optional Standard Optional Standard Optional Optional Standard Optional NIST CALIBRATION REFERENCE HEL-705-U-0-12-00 HEL-705-U-1-12-00 HEL-707-U-0-12-00 HEL-707-U-1-12-00 HEL-711-U-0-12-00 HEL-711-U-1-12-00 HEL-712-U-0-12-00 HEL-712-U-1-12-00 HEL-716-U-0-12-00 HEL-716-U-1-12-00 HEL-716-U-1-12-C2 HEL-717-U-0-12-00 HEL-717-U-1-12-00
NIST @ 0 and 100 C
www.honeywell.com/sensing
17
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
Temperature Sensors Thermistors
Thermistors change resistance with a change in temperature. They do not amplify, rectify, polarize or generate a signal. The thermistor temperature may be changed by the surrounding temperature or by self-heating the thermistor by passing a current through it. Most applications such as temperature measurement and control or copper coil compensation require that the power dispersed in a thermistor be kept to a minimum so as not to perceptibly self-heat the thermistor. Other applications depend entirely on the self-heating effect. When the surrounding temperature is fixed, the resistance of a thermistor is largely a function of power being dispersed within it, raising its temperature above its environment. Under these operating conditions, the temperature may rise 100 C to 200 C [121 F to 392 F] and the resistance may be lowered to 1/1000th of its original value at low current. This self-heating characteristic provides a whole field of uses for the thermistor. In the self-heat state it is thermally sensitive (its resistance will be changed) to any condition, changing the rate at which heat is conducted away from it. If the rate of heat removal is ideally fixed, then the thermistor is sensitive to power input and suited for use in voltage or power level control applications.
Glass Encapsulated Chip (GEC) Thermistors
The GECs are high-quality, hermetically-sealed, glass-encapsulated chip thermistors in an axial lead package. They cover the full temperature range of -60 C to 300 C [-76 F to 572 F]. These rugged sensors are designed for applications which demand reliability at low cost. The uniform dimensions are ideally suited for automated assembly. Operating temperature: -60 C to 300 C [-76 F to 572 F] Encapsulation: DO-35 glass Lead material: Tinned copper-clad steel Dissipation constant (DC): 2.5 mW/C in still air min. Time constant (TC): 4 s in still air max. Resistance range at 25 C [77 F]: 1 kOhm to 1 MOhm
OPTIONS
At 25 C [77 F]
OHM 1,000 2,000 3,000 5,000 5,000 10,000 10,000 10,000 20,000 30,000 50,000 50,000 100,000 100,000 200,000 500,000 1M % TOLERANCE 10 10 10 5 10 5 10 5 10 10 5 10 5 10 10 10 10 R/T CURVE 10A 10 10 10 10 10 16 16 16 16 16 16 16 16 1 1 1 REFERENCE 135-102DAG-J01 135-202FAG-J01 135-302FAG-J01 135-502FAF-J01 135-502FAG-J01 135-103FAF-J01 135-103FAG-J01 135-103LAF-J01 135-203LAG-J01 135-303KAG-J01 135-503LAF-J01 135-503LAG-J01 135-104LAF-J01 135-104LAG-J01 135-204QAG-J01 135-504QAG-J01 135-105QAG-J01
CHIP THERMISTOR GLASS ENCAPSULATION 28,6 [1.125]
2,0 DIA. [0.08]
Interchangeable R/T curve matched
1 C from 0 C to 100 C [32 F to 212 F]
OHM 10,000 20,000 30,000 50,000 100,000 R/T CURVE 16 16 16 16 16 REFERENCE 135-103LFW-J01 135-203LFW-J01 135-303LFW-J01 135-503LFW-J01 135-104LFW-J01
4,6 [0.81] 0,51 DIA. TINNED COPPER CLAD STEEL [0.020]
18
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
Uncoated chip
Epoxy-coated or Uncoated Chip Thermistors
Epoxy-coated or Uncoated Chip thermistors are available in a broad range of custom resistance values and R/T curves. They are also available in two lead types: * Uninsulated: 0,2032 mm [0.008 in] diameter, tinned copper for 1 kOhm or less, and tinned copper alloy for greater than 1 kOhm. * Insulated: 0,254 mm [0.010 in] diameter, nickel wire, Teflon-insulated, 38,1 mm [1.5 in] long and furnished with 6,35 mm [0.25 in] stripped ends of 0,4064 mm [0.016 in] and 0,508 mm [0.020 in] tin-plated copper leads. Operating temperature range: -40 C to 125 C* [-40 F to 257 F]* Encapsulation: Epoxy-coated or uncoated Lead material: * Uninsulated: tinned copper/copper alloy * Insulated: tinned copper/copper alloy with nickel wire Teflon Dissipation constant (DC): 0.75 mW/C in still air min. Time constant (TC): 15 s in still air max. Resistance range at 25 C [77 F]: 100 Ohm to 100 kOhm *Very accurate (0.2 C) when used between 0 C to 70 C [32 F to 158 F]. Other ranges and tolerances are available.
0,76 MAX [0.030]
1,40 0,51 [0.055 0.020]
1,40 0,51 [0.055 0.020]
10 % Tolerance at 25 C [77 F], uninsulated leads
OHM 100 300 500 1,000 2,000 3,000 5,000 10,000 20,000 30,000 50,000 100,000 R/T CURVE 17 17 10A 10A 16 16 16 16 16 18 1 1 REFERENCE 195-101CAG-A01 195-301CAG-A01 195-501DAG-A01 195-102DAG-A01 195-202LAG-A01 195-302LAG-A01 195-502LAG-A01 195-103LAG-A01 195-203LAG-A01 195-303KAG-A01 195-503QAG-A01 195-104QAG-A01
OPTIONS
Epoxy-coated chip
38,1 [1.50] 2,54 MAX [0.10]
10 % Tolerance at 25 C [77 F], insulated leads
OHM 100 300 500 1,000 2,000 3,000 5,000 10,000 20,000 30,000 50,000 100,000 R/T CURVE 17 17 10A 10A 16 16 16 16 16 18 1 1 REFERENCE 198-101CAG-A01 198-301CAG-A01 198-501DAG-A01 198-102DAG-A01 198-202LAG-A01 198-302LAG-A01 198-502LAG-A01 198-103LAG-A01 198-203LAG-A01 198-303KAG-A01 198-503QAG-A01 198-104QAG-A01
10 % Tolerance at 25 C [77 F], uninsulated leads
OHM 100 300 500 1,000 2,000 3,000 5,000 10,000 20,000 30,000 50,000 100,000 R/T CURVE 17 17 10A 10A 16 16 16 16 16 18 1 1 REFERENCE 197-101CAG-A01 197-301CAG-A01 197-501DAG-A01 197-102DAG-A01 197-202LAG-A01 197-302LAG-A01 197-502LAG-A01 197-103LAG-A01 197-203LAG-A01 197-303KAG-A01 197-503QAG-A01 197-104QAG-A01
10 % Tolerance at 25 C [77 F], insulated leads
OHM 100 300 500 1,000 2,000 3,000 5,000 10,000 20,000 30,000 50,000 100,000 R/T CURVE 17 17 10A 10A 16 16 16 16 16 18 1 1 REFERENCE 199-101CAG-A01 199-301CAG-A01 199-501DAG-A01 199-102DAG-A01 199-202LAG-A01 199-302LAG-A01 199-502LAG-A01 199-103LAG-A01 199-203LAG-A01 199-303KAG-A01 199-503QAG-A01 199-104QAG-A01
www.honeywell.com/sensing
19
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
UNI-CURVE Interchangeable Thermistors
The UNI-CURVE Interchangeable thermistors are temperature-matched. They offer additional cost savings by eliminating the need for individual resistance temperature calibration, as well as standardization of circuit components and simplification of design and replacement problems. Operating temperature range: -40 C to 150 C* [-40 F to 302 F]* Encapsulation: Epoxy-coated Lead material: Tinned copper alloy Dissipation constant (DC): 0.75 mW/C in still air min. Time constant (TC): 15 s in still air max. Resistance range at 25 C [77 F]: 1 kOhm to 100 kOhm *Very accurate (0.2 C) when used between 0 C to 70 C [32 F to 158 F]. Other ranges and tolerances are available.
Disc Thermistors
Uncoated or epoxy-coated Disc thermistors are available in a broad range of custom resistance values and R/T curves. They are only available with uninsulated leads. Diameters range from 2,54 mm [0.1 in] to 10,16 mm [0.4 in]. They are ideally suited for low cost applications with a maximum temperature of 150 C [302 F]. They are also well suited for PC board mount and are available on tape and reel. Operating temperature range: -60 C to 150 C [-76 F to 302 F] Encapsulation: Epoxy-coated or uncoated Lead material: Uninsulated: tinned copper/copper alloy Dissipation constant (DC): Varies with size, ranges from 3 mW/C to 8 mW/C Time constant (TC): Varies with size, ranges from 10 s to 32 s Resistance range at 25 C [77 F]: 100 Ohm to 100 kOhm
38,1 [1.50] 2,4 [0.095]
OPTIONS Epoxy-coated chip
6,35 [0.25]
0,2032 DIA. TINNED COPPER ALLOY [0.008]
OPTIONS
0,2 C Tolerance at 25 C [77 F] 0 C to 70 C [32 F to 158 F]
OHM 1,000 2,252 3,000 5,000 10,000 30,000 30,000 50,000 100,000 R/T CURVE 10A 16 16 16 16 18 1 1 1 REFERENCE 192-102DET-A01 192-222LET-A01 192-302LET-A01 192-502LET-A01 192-103LET-A01 192-303KET-A01 192-303QET-A01 192-503QET-A01 192-104QET-A01 38,1 [1.50]
LEAD SPACING
10 % Tolerance at 25 C [77 F] Lead diameter 0,4064 mm [0.016 in] Lead spacing 2,54 mm [0.1 in]
OHM 500 1,000 3,000 5,000 10,000 50,000 100,000 R/T CURVE 10 10 16 16 16 1 1 DC MIN. 3 4 3 4 4 3 3 TC MAX. 10 10 10 10 10 10 10 REFERENCE 140-501FAG-RB1 140-102FAG-RB1 140-302LAG-RB1 140-502LAG-RB1 140-103LAG-RB1 140-503QAG-RB1 140-104QAG-RB1
0,5 C Tolerance at 25 C [77 F] 0 C to 70 C [32 F to 158 F]
OHM 1,000 2,252 3,000 5,000 10,000 30,000 30,000 50,000 100,000 R/T CURVE 10A 16 16 16 16 18 1 1 1 REFERENCE 192-102DEV-A01 192-222LEV-A01 192-302LEV-A01 192-502LEV-A01 192-103LEV-A01 192-303KEV-A01 192-303QEV-A01 192-503QEV-A01 192-104QEV-A01
10 % Tolerance at 25 C [77 F] Lead diameter 0,508 mm [0.020 in] Lead spacing 5,08 mm [0.2 in]
OHM 100 200 300 1,000 3,000 5,000 10,000 30,000 50,000 R/T CURVE 10 10 10 16 16 16 1 1 1 DC MIN. 4 5 6 6 6 7 4 6 7 TC MAX. 16 18 20 20 22 35 20 25 30 REFERENCE 143-101FAG-RC1 143-201FAG-RC1 143-501FAG-RC1 143-102LAG-RC1 143-302LAG-RC1 143-502LAG-RC1 143-103QAG-RC1 143-303QAG-RC1 143-503QAG-RC1
1,0 C Tolerance at 25 C [77 F] 0 C to 70 C [32 F to 158 F]
OHM 1,000 2,252 3,000 5,000 10,000 30,000 30,000 50,000 100,000 R/T CURVE 10A 16 16 16 16 18 1 1 1 REFERENCE 192-102DEW-A01 192-222LEW-A01 192-302LEW-A01 192-502LEW-A01 192-103LEW-A01 192-303KEW-A01 192-303QEW-A01 192-503QEW-A01 192-104QEW-A01
20
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS Uncoated chip
2,54 [0.10]
Standard Bead Thermistors
Standard Bead thermistors are hermetically-sealed in glass. These small units provide maximum stability when used to 300 C [572 F] for high temperature design requirements. They are ideally suited for the most stringent military, aerospace and oceanographic applications. Operating temperature range: -60 C to 300 C [-76 F to 572 F] Encapsulation: Glass hermetic seal Lead material: Platinum iridium Dissipation constant (DC): 0.4 mW/C in still air min. Time constant (TC): 4 s in still air max. Resistance range at 25 C [77 F]: 200 Ohm to 1 MOhm
LEAD SPACING
38,1 [1.50]
10 % Tolerance at 25 C [77 F] Lead diameter 0,4064 mm [0.016 in] Lead spacing 2,54 mm [0.1 in]
OHM 500 1,000 3,000 5,000 10,000 50,000 100,000 R/T CURVE 10 10 16 16 16 1 1 DC MIN. 3 4 3 4 4 3 3 TC MAX. 10 10 10 10 10 10 10 REFERENCE 142-501FAG-RB1 142-102FAG-RB1 142-302LAG-RB1 142-502LAG-RB1 142-103LAG-RB1 142-503QAG-RB1 142-104QAG-RB1
OPTIONS
Adjacent leads
9,5 [0.375] 2,29 [0.09] 1,14 DIA. [0.045] 0,1016 DIA. [0.004]
20 % Tolerance at 25 C [77 F]
OHM 200 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1M R/T CURVE 8 11 11 11 12 13 14 15 15 4 5 RATIO 0 C/50 C 4.80 7.04 7.04 7.04 7.59 9.11 9.53 10.45 10.45 11.78 13.12 REFERENCE 112-201BAJ-B01 112-102EAJ-B01 112-202EAJ-B01 112-502EAJ-B01 112-103FAJ-B01 112-203HAJ-B01 112-503JAJ-B01 112-104KAJ-B01 112-204KAJ-B01 112-504NAJ-B01 112-105PAJ-B01
10 % Tolerance at 25 C [77 F] Lead diameter 0,508 mm [0.020 in] Lead spacing 5,08 mm [0.2 in]
OHM 100 200 300 500 1,000 3,000 5,000 10,000 30,000 50,000 R/T CURVE 10 10 10 10 16 16 16 1 1 1 DC MIN. 4 5 6 6 6 6 7 4 7 8 TC MAX. 16 18 20 25 20 22 35 20 28 32 REFERENCE 145-101FAG-RC1 145-201FAG-RC1 145-301FAG-RC1 145-501FAG-RC1 145-102LAG-RC1 145-302LAG-RC1 145-502LAG-RC1 145-103QAG-RC1 145-303QAG-RC1 145-503QAG-RC1
Axial leads
0,1016 DIA. [0.004]
1,14 DIA [0.045] 2,29 [0.090]
9,5 [0.375]
20 % Tolerance at 25 C [77 F]
OHM 2,000 5,000 10,000 100,000 600,000 R/T CURVE 11 11 12 15 4 RATIO 0 C/50 C 7.04 7.04 7.59 10.45 11.78 REFERENCE 112-202EAJ-H01 112-502EAJ-H01 112-103FAJ-H01 112-104KAJ-H01 112-604NAJ-H01
www.honeywell.com/sensing
21
TEMPERATURE - THERMISTORS
Small Bead Thermistors
Small Bead thermistors feature relatively uniform size, offer ultra-fast time response and are highly sensitive to electric power. They are ideally suited for use in low heat capacity applications and their micro size makes them perfect for use in extremely small assemblies such as catheters and hypodermic needles. They are also used in self-heat applications such as gas analysis, gas flow measurement and thermal conductivity analysis. Operating temperature range: -60 C to 300 C [-76 F to 572 F] Encapsulation: Glass hermetic seal Lead material: Platinum iridium Dissipation constant (DC): 0.1 mW/C in still air min. Time constant (TC): 1 s in still air max. Resistance range at 25 C [77 F]: 2 kOhm to 100 kOhm
Glass Probe Thermistors
Glass Probe thermistors are shock resistant, rugged, glass-encapsulated units that are ideally suited for immersion in fluid and convenient for mounting in air sensor assemblies. They are available in two configurations: standard and mini. -60 F to 300 C [-72 F to 572 F] Glass Dumet (copper-clad Ni-Fe wire) * Standard: 1.0 mW/C in still air min. * Mini: 0.7 mW/C in still air min. Time constant (TC): * Standard: 22 s in still air max. * Mini: 10 s in still air max. Resistance range at 25 C [77 F]: 1 kOhm to 10 MOhm Operating temperature range: Encapsulation: Lead material: Dissipation constant (DC):
OPTIONS
Adjacent leads
9,5 [0.375] 2,51 [0.020] 0,36 DIA. [0.014] 0,0254 DIA. [0.001]
OPTIONS
Standard
50,8 [2.00] 12,7 [0.50] 2,54 [0.10] 0,3048 DIA. DUMET [0.012]
At 25 C [77 F]
OHM 2,000 8,000 30,000 % TOLERANCE 25 20 25 R/T CURVE 9 11 11 RATIO 0 C/50 C [32 F/122 F] 5.50 7.04 7.04 REFERENCE 111-202CAK-B01 111-802EAJ-B01 111-303EAK-B01
20 % Tolerance at 25 C [77 F] dc 1.0 mW/C min., TC 22 s max.
OHM 1,000 2,000 5,000 10,000 50,000 100,000 200,000 500,000 1M 10 M R/T CURVE 11 11 11 12 14 15 15 4 5 6 RATIO 7.04 7.04 7.04 7.59 9.53 10.45 10.45 11.89 13.12 15.65 REFERENCE 121-102EAJ-Q01 121-202EAJ-Q01 121-502EAJ-Q01 121-103FAJ-Q01 121-502JAJ-Q01 121-104KAJ-Q01 121-202KAJ-Q01 121-504NAJ-Q01 121-105PAJ-Q01 121-106QAJ-Q01
Axial leads
0,36 DIA [0.014] 0,51 [0.020]
0,0254 DIA. [0.001]
9,5 [0.375]
Mini
31,5 [1.25] 12,7 [0.50] 1,5 [0.06]
At 25 C [77 F]
OHM 2,000 8,000 10,000 100,000 % TOLERANCE 25 20 20 25 R/T CURVE 9 11 11 13 RATIO 0 C/50 C [32 F/122 F] 5.50 7.04 7.04 9.11 REFERENCE 111-202CAK-H01 111-802EAJ-H01 111-103EAJ-H01 111-104HAK-H01
0,2032 DIA. DUMET [0.008]
20 % Tolerance at 25 C [77 F] dc 0.7 mW/C min., TC 10 s max.
OHM 1,000 2,000 10,000 50,000 100,000 R/T CURVE 11 11 12 14 15 RATIO 7.04 7.04 7.59 9.53 10.45 REFERENCE 120-102EAJ-Q01 120-202EAJ-Q01 120-103FAJ-Q01 120-502JAJ-Q01 120-104KAJ-Q01
22
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
E-I Matched Bead Thermistors
E-I Matched Bead thermistors are designed for use in gas chromatography and other thermal conductivity gas analysis instruments. Each bead is mounted to a special hermetically-sealed header. For maximum sensitivity, the higher resistance units should be used at higher ambient temperatures. Operating temperature range: Encapsulation: Lead material:
12,7 [0.50]
ICL Inrush Current Limiter Thermistors
ICL Inrush Current Limiter thermistors are a cost-effective way of limiting the inrush of current that may damage components in a switching power supply and in other power devices when the equipment is turned on. These devices have solderable leads and are PC board mountable. Operating temperature range: -40 C to 185 C [-40 F to 365 F] Maximum steady state current: 1 A to 30 A Encapsulation: Black silicone Lead material: Tinned copper Dissipation constant (DC): 12.7 mW/C to 23 mW/C Time constant (TC): 32 s to 93 s Resistance range at 25 C [77 F]: 0.5 Ohm to 220 Ohm 20 % Resistance at max. steady state current: 0.01 Ohm to 2.34 Ohm Max. diameter 9,5 mm [0.374 in] to 32.0 mm [1.260 in] Max. thickness 5,0 mm [0.204 in] to 8.0 mm [0.327 in] Lead diameter 0,8 mm [0.032 in] to 1.0 mm [0.040 in]
-60 C to 300 C [-76 F to 572 F] Glass hermetic seal Tinned Ni-Fe
THERMISTOR BEAD
9,65 [0.38]
31,75 [1.25]
0,76 DIA.TINNED Ni-Fe [0.03]
DIA.
THICKNESS
OPTIONS Helium-matched assembly
Characteristics 115-802EDJ-801 Resistance at 25 C [77 F] 8000 Ohm 25 % Resistance at 0 C [32 F] (approx.) 23,200 Ohm Resistance at 50 C [122 F] (approx.) 3,200 Ohm Ratio of resisistance 0 C/50 C 6.56 to 7.99 Beta nominal at 25 C 3495 K Temperature coefficient at 25 C -3.9 %/C Time constant (TC) still air max. 1s Dissipation constant (DC) still air min. 0.16 mW/C DC helium 0.5 mW/C Power rating (air) 45 mW Power rating (helium) 140 mW Max. ambient temperature 250 C [482 F] Max. operating temperature (including self-heat) 300 C [572 F] Resisistance at max. operating temperature 25 Ohm
25,4 MIN. [1.00]
7,87 NOM. [0.310]
2.54 NOM. [0.10]
OHM 0.5 1 1 2 2.5 2.5 2.5 5 5 10 10 10 10 10 12 16 20 40 50 80 120 220
2 % resistance at 25 C [77 F]
DESCRIPTION Two 111-802EAJ-H01 each mounted on a glass hermetic seal and matched in helium to within 30 mV, 25 mV and 20 mV of each other at 2 mA, 5 mA, 10 mA and 15 mA. REFERENCE 115-802EDJ-801
Air-matched assembly
Characteristics 115-202CDK-801 Resistance at 25 C [77 F] 2000 Ohm 25 % Resistance at 0 C [32 F] (approx.) 4900 Ohm Resistance at 50 C [122 F] (approx.) 890 Ohm Ratio of resistance 0 C/50 C 4.95 to 6.95 Beta nominal at 25 C 3000 K Temperature coefficient at 25 C -3.4 %/C Time constant (TC) still air max. 1s Dissipation constant (DC) still air min. 0.16 mW/C DC helium 0.5 mW/C Power rating (air) 15 mW Power rating (helium) 60 mW Max. ambient temperature 100 C [212 F] Max. operating temperature (including self-heat) 150 C [302 F] Resisistance at max. operating temperature 88 Ohm
MAX. STEADY STATE CURRENT (A) 30 20 30 18 8 8 15 6 7 2 3.2 5 6 8 4 4 2 2 2 2.5 3 2
RESISTANCE AT MAX. STEADY STATE CURRENT (OHM) 0.01 0.02 0.02 0.03 0.07 0.06 0.03 0.1 0.07 0.3 0.18 0.13 0.15 0.1 0.26 0.27 0.5 0.6 0.72 0.75 0.9 0.8
REFERENCE ICL32OR530-01 ICL221R020-01 ICL321R030-01 ICL222R018-01 ICL152R508-01 ICL122R508-01 ICL222R515-01 ICL155R006-01 ICL155R007-01 ICL1010002-01 ICL1010004-01 ICL1210005-01 ICL1510006-01 ICL2210008-01 ICL1512004-01 ICL1516004-01 ICL1220002-01 ICL1240002-01 ICL1250002-01 ICL1580003-01 ICL2212103-01 ICL1522102-01
5 % resistance at 25 C [77 F]
DESCRIPTION Two 111-202CAK-H01 each mounted on a glass hermetic seal and matched in air to within 15 mV of each other at 5 mA, 10 mA and 15 mA. REFERENCE 115-202CDK-801
www.honeywell.com/sensing
23
TEMPERATURE - PROBES
Temperature Sensors - Probes
Temperature Sensor Probes are finished thermister assemblies complete with thermister housing, extension leads and sometimes a connector. A variety of customized packages are available. NOTE: The products in this section do not follow the "how to use this catalogue" instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information.
ES120 Series Coolant/Oil Temperature Sensor Probes
The ES120 probe is a thermistor mounted into a plastic lead frame and assembled into a metal body. This subassembly is then overmolded to produce both the electrical connection system and the hexagonal shape for easy installation. The all-plastic design reduces heat loss through the sensor, thereby reducing wind chill effects. Operating temperature range: -40 C to 155 C [-40 F to 311 F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in thermal epoxy Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: Tor values (time to reach 63.2 % of the difference between two temperatures) are typically 19 s rising temperature and 14 s falling temperature Time constant: None Resistance range at 25 C [77 F] 2.5 kOhm at 20 C [68 F] 5 %
ES110 Series Inlet Air Temperature Sensor Probes
The ES110 probe is a thermistor mounted into a plastic lead frame and assembled into a metal body. This subassembly is then overmolded to produce both the electrical connection system and the hexagonal shape for easy installation. Two end configurations are available depending upon response required or degree of protection. The all-plastic design reduces heat loss through the sensor, thereby reducing wind chill effects. Operating temperature range: -40 C to 155 C [-40 F to 311 F] Encapsulation: Standard NTC (Negative Temperature Coefficient) epoxy protection Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: 0.85 mW/C in still air at 25 C [77 F] Time constant: 1 s in liquids, 12 s max. in still air Resistance range at 25 C [77 F] 2.5 kOhm at 20 C [68 F] 5 %
SERIES NAME ES120 Coolant/Oil Temperature Sensor Probe
SERIES NAME ES110 Inlet Air Temperature Sensor Probe
24
www.honeywell.com/sensing
TEMPERATURE - PROBES
Air Conditioning Temperature Sensor Probes
A fully overmolded and protected sensor incorporating a specially developed NTC (Negative Temperature Coefficient) to withstand very aggressive, damp operating conditions. The housing is snap fit for easy assembly. Operating temperature range: -30 C to 100 C [-22 F to 212 F] Encapsulation: Special NTC epoxy coating Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: 2.5 mW/C in still air Time constant: 2 s in water, 15 s max. in still air Resistance range at 25 C [77 F] 9 kOhm at 0 C [32 F] 1.5 %
Earth Return (Ground) Temperature Sensor Probes
An all-metal temperature sensor, with the body being the ground, incorporating a flat disc thermistor held flush on the base of the body by a spring-loaded pressure pad. This sensor provides a quick response to small variations in high temperature changes. Operating Temperature Range: Encapsulation: -40 C to 155 C [-40 F to 311 F] NTC (negative temperature coefficient) encapsulated in a silicone paste Lead Material: Standard Lucar type or other variations Dissipation Constant: 3 mW/C in still air Time Constant: 10 s in automotive coolant Resistance Range at 25 C [77 F] Per customer requirements
NAME Air Conditioning Temperature Sensor Probe
NAME Earth Return (Ground) Temperature Sensor Probe
Refrigerant Temperature Sensor Probes
A fully sealed, quick response temperature sensor suitable for use in HVAC systems. Operating temperature range: -40 C to 140 C [-40 F to 284 F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in a thermal heat paste Lead material: Terminals are 1,5 mm x 0,6 mm [0.06 in x 0.02 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: Tor values (time to reach 63.2 % of the difference between two temperatures) are typically 10 s rising temperature and 6 s falling temperature Time constant: None Resistance range at 25 C [77 F] 2.5 kOhm at 20 C [68 F], calibrated at 3 % at 100 C [212 F]
Surface Temperature Sensor Probes
Sensor assembly is designed to have good heat conductivity between the thermistor element and the area to be monitored. Time response is consistent with the thermal conductivity of the surface being measured. Multiple configurations allow sensor to be mounted, bolted, riveted or attached adhesively. -60 C to 150 C [-76 F to 302 F] Thermally conductive epoxy used to pot discrete component into surface-style housing Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 3.3 mW/C to 12 mW/C (varies with size and housing style) Time constant: 1 s to 40 s (application dependent) Resistance range at 25 C [77 F] Per customer requirements Operating temperature range: Encapsulation:
NAME Refrigerant Temperature Sensor Probe
NAME Surface Temperature Sensor Probe
www.honeywell.com/sensing
25
TEMPERATURE - PROBES
Air/Gas Temperature Sensor Probes
Air/Gas probes contain an exposed thermistor element because gas is not as good a heat conductor or thermal sink as a liquid, and because time response is normally an important consideration. The sensor housing may be composed of plastic or other thermally conductive materials to reduce conduction and heat from the gas circulating around the thermistor. Multiple configurations allow easy mounting. Operating temperature range: -60 C to 150 C [-76 F to 302 F] Encapsulation: None, sensing element is exposed Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 0.1 mW/C to 3 mW/C (design specific) Time constant: 4 s to 150 s (application and design dependent) Resistance range at 25 C [77 F] Per customer requirements
Immersion Temperature Sensor Probes
Custom designed and application specific, immersion probes are designed to be directly placed in the liquid medium to be measured. A large variety of housing alloys are available. Multiple configurations allow easy mounting. Operating temperature range: -60 C to 300 C [-76 F to 572 F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in housing appropriate to the application Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 5 mW/C to 10 mW/C (varies with size and housing style) Time constant: 1 s to 12 s (design dependent) Resistance range at 25 C [77 F] Per customer requirements
NAME Air/Gas Temperature Sensor Probe
NAME Immersion Temperature Sensor Probe
26
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
Thermostats - Commercial
Commercial thermostats include products for use in a wide array of small and major appliances, automotive applications, office copy machines, heat and smoke detectors and HVAC equipment. These snap-action thermostats include automatic or manual reset options, phenolic or ceramic housings, and a variety of mounting brackets and terminal options. NOTE: The products in this section do not follow the "how to use this catalogue" instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information.
2450R/2450HR/2455R Series Phenolic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. These products are factory calibrated to the customer's specification. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Phenolic 0 C to 150 C [32 F to 302 F] 0 C to 177 C [32 F to 350 F]
2450HR
6,73 [0.265] 2,36 [0.093] DIA. 1,57 [0.062] DEEP 13,94 [0.549] 12,34 9,12 [0.486] [0.359]
14,43 DIA. [0.568]
16,0 DIA. [0.630]
SERIES NAME 2450HR Phenolic Automatic Reset Thermostat
2450R
14,43 DIA. [0.568]
2455R
9,63 [0.379]
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
16,0 DIA. [0.630] 0,51 [0.020]
SERIES NAME 2450R Phenolic Automatic Reset Thermostat
SERIES NAME 2455R Phenolic Automatic Reset Thermostat
www.honeywell.com/sensing
27
THERMOSTATS - COMMERCIAL
2450RC/2450RCH/2455RC Series Ceramic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Ceramic 0 C to 260 C [32 F to 500 F] -20 C to 287 C [0 F to 550 F]
2450CM/2455RM Series Ceramic and Phenolic Manual Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. The circuit will stay open above room ambient temperature until the manual reset button is pressed. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Manual 15 A resistive max. Ceramic or phenolic 52 C to 232 C [125 F to 450 F] (ceramic) 52 C to 150 C [125 F to 302 F] (phenolic) Environmental exposure range: 10 C to 260 C [50 F to 500 F] (ceramic) 10 C to 177 C [50 F to 350 F] (phenolic) Reset type: Amperage capacity: Housing material: Operating temperature range:
2450RC
16,00 [0.379]
2450CM
1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 15,98 [0.629] 14,48 12,90 [0.570] [0.508]
9,63 [0.379]
14,43 DIA. [0.568]
0,51 [0.020]
SERIES NAME 2450RC Ceramic Automatic Reset Thermostat 16,0 DIA. [0.630]
9,55 9,04 [0.376] [0.356] 0,51 [0.020]
SERIES NAME 2450CM Ceramic Manual Reset Thermostat
2450RCH
2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,48 [0.570] 12,90 9,04 [0.508] [0.356] 16,0 DIA. [0.630]
SERIES NAME 2450RCH Ceramic Automatic Reset Thermostat
2455RM
2,77 DIA. RESET [0.109] BUTTON 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING
14,43 DIA. [0.568]
15,88 ON CONTACT [0.625] CLOSING 14,43 DIA. [0.568] 11,91 [0.469]
ENCLOSED DISK
16,0 DIA. [0.630]
0,51 [0.020]
2455RC
SERIES NAME 2455RM Phenolic Manual Reset Thermostat
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 2455RC Ceramic Automatic Reset Thermostat
28
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
2450A/2455A Series Heat Detection Thermostats
The gold contacts open or close on a temperature rise of 47 C to 107 C [117 F to 225 F]. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Phenolic, epoxy-sealed cap and terminal Operating temperature range: 47 C to 107 C [117 F to 225 F] Environmental exposure range: 0 C to 150 C [32 F to 302 F]
2450R/2450RCH/2455R/2455RC Series "One-shot" 1/2 in Thermostats
Products are designed for high limit applications where automatic reset is not desired. Reset type: Amperage capacity: Housing material: Operating temperature range: None 15 A resistive max. ceramic or phenolic 52 C to 260 C [125 F to 500 F] (ceramic) 52 C to 150 C [125 F to 302 F] (phenolic) Environmental exposure range: 18 C to 316 C [0 F to 600 F] (ceramic) 18 C to 177 C [0 F to 350 F] (phenolic)
2450A
9,63 [0.379]
2450R
14,43 DIA. [0.568]
0,51 [0.020]
9,63 [0.379]
SERIES NAME 2450A Heat Detection Thermostat
16,0 DIA. [0.630]
SERIES NAME 2450R Phenolic "One-shot" 1/2 in Thermostat
0,51 [0.020]
2455A
11,91 [0.469]
2450RCH
2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,48 [0.570] 12,90 9,04 [0.508] [0.356] 16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 2455A Heat Detection Thermostat
14,43 DIA. [0.568]
2455RBV Series Overmolded Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Ceramic or phenolic, epoxy overmold -12 C to 105 C [10 F to 221 F] -18 C to 121 C [0 F to 250 F]
ENCLOSED DISK
SERIES NAME 2450RCH Ceramic "One-shot" 1/2 in Thermostat
2455R
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
2455RBV
AS REQUIRED
SERIES NAME 2455R Phenolic "One-shot" 1/2 in Thermostat
WIRE GAGE AND INSULATION AS REQUIRED
AS REQUIRED
2455RC
18,54 [0.730]
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
17,27 DIA. [0.680] 0,51 [0.020]
0,51 [0.020]
SERIES NAME 2455RBV Overmolded Automatic Reset Thermostat
SERIES NAME 2455RC Ceramic "One-shot" 1/2 in Thermostat
www.honeywell.com/sensing
29
THERMOSTATS - COMMERCIAL
2450R Series Annular Ring Cap Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Automatic 15 A resistive, 12 Vdc Phenolic, can be partially or totally sealed against water ingress Operating temperature range: -10 C to 55 C [14 F to 131 F] Environmental exposure range: -40 C to 130 C [-40 F to 266 F] Life Cycle Capability: 300 K at 12 Vdc, 10 A Low Temperature Differential: Down to 8 C [46 F] Switch Temperature Tolerance: 3 C Reset type: Amperage capacity: Housing material:
2450R Series Fully Sealed Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Life cycle capability: Low temperature differential: Switch temperature tolerance: Automatic 15 A resistive, 12 Vdc Phenolic housing, aluminium cap totally encapsulated in water resistant epoxy -10 C to 55 C [14 F to 131 F] -40 C to 130 C [-40 F to 266 F] 300 K at 12 Vdc, 10 A Down to 8 C [46 F] 3 C
16,1 MAX. [0.63]
14,43 DIA. [0.568]
9,63 [0.379]
11,5 [0.45]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 2450R Phenolic Annular Ring Cap Automatic Reset Thermostat
2450R/2455R Series Protected Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Basic thermostat is protected from the environment by sealing it in a metal housing or encapsulating it in epoxy. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive, 12 Vdc Brass, aluminium, stainless steel and epoxy 15 C to 130 C [59 F to 266 F] -40 C to 155 C [-40 F to 311 F]
SERIES NAME 2450R Fully Sealed Thermostat
SERIES NAME 2450R Protected Thermostat 2455R Protected Thermostat
30
www.honeywell.com/sensing
THERMOSTATS - PRECISION
Thermostats - Precision
Precision snap-action thermostats include both hermetic and nonhermetic devices for use in a wide array of applications including computers, copy machines, aircraft, radar equipment, medial equipment and electronic control systems. We also offer custom-packaged thermostats for application flexibility and industrial-grade thermostats designed to operate in extreme environmental conditions. NOTE: The products in this section do not follow the "how to use this catalogue" instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information.
3100/3106 Series Hermetic Thermostats
The 3100/3106 Series is a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100 % thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. It is manufactured and tested to meet or exceed critical commercial and industrial specifications. The 3106 Series has gold alloy contacts for low voltage applications. 0.5 A resistive (3106 Series) 7 A resistive (3100 Series) Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 C to 260 C [-20 F to 500 F] (3100 Series) -29 C to 204 C [-20 F to 400 F] (3106 Series) Environmental exposure range: -62 C to 288 C [-80 F to 550 F] Dielectric strength: MIL-STD-202, Method 301 1250 Vac 60 Hz terminal to case (3100, 3100U, 3106 Series) 1500 Vac 60 Hz terminal to case (3100UX Series) Insulation resistance: MIL-STD-202, Method 302, Condition B 50 MOhm, 500 Vdc applied Contact resistance: MIL-STD-202, Method 307 25 mOhm (3106 Series) 50 mOhm (3100 Series) Hermetic seal: MIL-STD-202, Method 112, Condition A 1x10-5 atm cc/s Moisture resistance: MIL-STD-202 Method 106 Amperage:
SERIES NAME 3100 Hermetic Thermostat 3100U Hermetic Thermostat 3100UX Hermetic Thermostat 3106 Hermetic Thermostat
www.honeywell.com/sensing
31
THERMOSTATS - PRECISION
3150/3156 Series Low Silhouette Hermetic Thermostats
The 3150/3156 Series is a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. The low silhouette and compact design make it especially well suited for applications that require miniaturization. The 3156 Series has gold alloy contacts for low voltage applications. 0.5 A resistive (3156 Series) 7 A resistive (3150 Series) Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 C to 177 C [-20 F to 350 F] Environmental exposure range: -62 C to 260 C [-80 F to 500 F] Dielectric strength: MIL-STD-202, Method 301 750 Vac 60 Hz terminal to case (3150, 3156 Series) 1250 Vac 60 Hz terminal to case (3150U, 3156U Series) 1500 Vac 60 Hz terminal to case (3150UX Series) Insulation resistance: MIL-STD-202, Method 302, Condition B 50 MOhm, 500 Vdc applied Contact resistance: MIL-STD-202, Method 307 25 mOhm (3156 Series) 50 mOhm (3150 Series) Hermetic seal: MIL-STD-202, Method 112, Condition A 1x10-5 atm cc/s Moisture resistance: MIL-STD-202 Method 106 Amperage:
3800 Series Industrial-Grade Thermostats for Severe Duty Applications
The 3800 Series is used where high levels of vibration and mechanical shock are common but a military device is not required. It is easily customized for use in a variety of applications. Amperage: 7 A resistrive Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 C to 260 C [-20 F to 500 F] Environmental exposure range: -62 C to 260 C [-80 F to 500 F] Dielectric strength: MIL-STD-202, Method 301 1250 Vac terminal to case Insulation resistance: MIL-STD-202, Method 302, Condition B 50 MOhm min. terminal to case Contact resistance: MIL-STD-202, Method 307 50 mOhm max. Hermetic seal: MIL-STD-202, Method 112, Condition A 1 x 10-5 atm cc/s Moisture resistance: MIL-STD-202, Method 106 Vibration (random): MIL-STD-202, Method 214 30 g, 20 Hz to 2,000 Hz Vibration (sinusoidal): MIL-STD-202, Method 204, Condition D 20 G, 20 Hz to 2,000 Hz Mechanical shock: MIL-STD-202, Method 213, 400 G Thermal shock: MIL-STD-202. Method 107, Condition B Acceleration: MIL-STD-202, Method 212, 20 G
SERIES NAME 3150 Low Silhouette Hermetic Thermostat 3150U Low Silhouette Hermetic Thermostat 3150UX Low Silhouette Hermetic Thermostat 3156 Low Silhouette Hermetic Thermostat 3156U Low Silhouette Hermetic Thermostat
SERIES NAME 3800 Industrial Grade Thermostat
32
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3000 Series Custom-packaged Thermostats
The 3000 Series incorporates a Honeywell thermostat assembled in a custom package for use in a variety of applications that require flexibility in mounting and terminal configurations. A typical product includes a 3100 hermetic internal thermostat with a terminal selection, housing selection and customized part number. These custom package devices operate in extreme environmental conditions, including exposure to hazardous substances, dust particles and liquid immersion. Amperage: Housing material: Operating temperature range: Environmental exposure range: Dielectric strength: 7 A resistive Stainless steel or brass -29 C to 260 C [-20 F to 500 F] -62 C to 288 C [-80 F to 550 F] MIL-STD-202, Method 301 1250 Vac 60 Hz terminal to case Insulation resistance: Contact resistance: Hermetic seal: Moisture resistance: MIL-STD-202, Method 302 50 MOhm to 500 MOhm MIL-STD-202, Method 307 50 mOhm max. MIL-STD-202, Method 112, Condition A 1 x 10-5 atm cc/s MIL-STD-202 Method 106
Terminations for 3000-45X* and 3000-55X* Housings
0
HERMETIC CONNECTOR BAYONET OR THREADED
1
WIRE LEADS, LENGTHS AS REQ'D.
Terminations for 3000-53X* and 3000-141 Housings
1
WIRE LEADS, LENGTHS AS REQ'D.
2a
6,35 [0.25] MALE QUICK CONNECTS
2a
6,35 [0.25] MALE QUICK CONNECTS
3
WIRE LEADS, LENGTHS AS REQ'D.
2b
6,35 [0.25] MALE QUICK CONNECTS
60 REF.
2b
6,35 [0.25] MALE QUICK CONNECTS
60 REF.
1/2 - 14 NPT THREAD
Housings
3000-45X*
25,4 [1.00]
Housings
3000-53X*
22,26 [0.875]
4a
6,35 [0.25] MALE QUICK CONNECTS
3/4 - 16 UNF-3A THREAD PROBE LENGTH
1/2 - 14 NPT THREAD
1/2 - 14 NPT THREAD
SENSING SURFACE
SENSING SURFACE
3000-55X* 4b
6,35 [0.25] MALE QUICK CONNECTS 1/2 - 14 NPT THREAD 22,26 [0.875]
3000-141
25,4 [1.00]
60 REF.
1/2 - 14 NPT THREAD PROBE LENGTH
3/4 - 16 UNF - 3A THREAD
SENSING SURFACE
SENSING SURFACE
SERIES NAME 3000 Custom-packaged Thermostat
www.honeywell.com/sensing
33
THERMOSTATS - PRECISION
3450R/3450HR/3455R Series Phenolic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. These products are factory calibrated to the customer's specification. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Phenolic 0 C to 150 C [32 F to 302 F] 0 C to 177 C [32 F to 350 F]
3450RC/3450RCH/3455RC Series Ceramic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Ceramic 0 C to 260 C [32 F to 500 F] -20 C to 287 C [0 F to 550 F]
3450R
14,43 DIA. [0.568] 9,63 [0.379]
3450RC
16,00 [0.379]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 3450R Phenolic Automatic Reset Thermostat
9,63 [0.379]
0,51 [0.020]
3450HR
6,73 [0.265] 2,36 [0.093] DIA. 1,57 [0.062] DEEP 13,94 [0.549] 12,34 9,12 [0.486] [0.359]
SERIES NAME 3450RC Ceramic Automatic Reset Thermostat
3450RCH
2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,48 [0.570] 12,90 9,04 [0.508] [0.356] 16,0 DIA. [0.630]
14,43 DIA. [0.568]
16,0 DIA. [0.630]
14,43 DIA. [0.568]
SERIES NAME 3450HR Phenolic Automatic Reset Thermostat
ENCLOSED DISK
SERIES NAME 3450RCH Ceramic Automatic Reset Thermostat
3455R 3455RC
14,43 DIA. [0.568] 11,91 [0.469]
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 3455R Phenolic Automatic Reset Thermostat
SERIES NAME 3455RC Ceramic Automatic Reset Thermostat
34
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3450CM/3455RM Series Ceramic and Phenolic Manual Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. The circuit will stay open above room ambient temperature until the manual reset button is pressed. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Manual 15 A resistive max. Ceramic or phenolic 52 C to 232 C [125 F to 450 F] (ceramic) 52 C to 150 C [125 F to 302 F] (phenolic) Environmental exposure range: 10 C to 260 C [50 F to 500 F] (ceramic) 10 C to 177 C [50 F to 350 F] (phenolic)
3455RBV Series Overmolded Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Amperage capacity: Housing material: Operating temperature range: Environmental exposure range: Automatic 15 A resistive max. Ceramic or phenolic, epoxy overmold -12 C to 105 C [10 F to 221 F] -18 C to 121 C [0 F to 250 F]
AS REQUIRED
3450CM
1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 15,98 [0.629] 14,48 12,90 [0.570] [0.508] 9,55 9,04 [0.376] [0.356] 16,0 DIA. [0.630] 0,51 [0.020]
WIRE GAGE AND INSULATION AS REQUIRED
AS REQUIRED
18,54 [0.730]
14,43 DIA. [0.568]
17,27 DIA. [0.680]
0,51 [0.020]
SERIES NAME 3450CM Ceramic Manual Reset Thermostat
SERIES NAME 3455RBV Overmolded Automatic Reset Thermostat
3455RM
2,77 DIA. RESET [0.109] BUTTON 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING
15,88 ON CONTACT [0.625] CLOSING 14,43 DIA. [0.568] 11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 3455RM Phenolic Manual Reset Thermostat
www.honeywell.com/sensing
35
THERMOSTATS - PRECISION
3450R/3450RC/3450RCH/3455R/3455RC Series "One-shot" 1/2 in Thermostats
Products are designed for high limit applications where automatic reset is not desired. None 15 A resistive max. Ceramic or phenolic 52 C to 260 C [125 F to 500 F] (ceramic) 52 C to 150 C [125 F to 302 F] (phenolic) Environmental exposure range: 18 C to 316 C [0 F to 600 F] (ceramic) 18 C to 177 C [0 F to 350 F] (phenolic) Reset type: Amperage capacity: Housing material: Operating temperature range:
3455R
14,43 DIA. [0.568] 11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
SERIES NAME 3455R Phenolic "One-shot" 1/2 in Thermostat
3450R
14,43 DIA. [0.568] 9,63 [0.379]
3455RC
14,43 DIA. [0.568]
11,91 [0.469]
16,0 DIA. [0.630]
0,51 [0.020]
16,0 DIA. [0.630] SERIES NAME 3450R Phenolic "One-shot" 1/2 in Thermostat
0,51 [0.020]
3450RC
SERIES NAME 3455RC Ceramic "One-shot" 1/2 in Thermostat
16,00 [0.379]
9,63 [0.379]
0,51 [0.020]
SERIES NAME 3450RC Ceramic "One-shot" 1/2 in Thermostat
3450RCH
2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,48 [0.570] 12,90 9,04 [0.508] [0.356] 16,0 DIA. [0.630]
14,43 DIA. [0.568]
ENCLOSED DISK
SERIES NAME 3450RCH Ceramic "One-shot" 1/2 in Thermostat
36
www.honeywell.com/sensing
HEATERS
Heaters
Heaters are resistive devices that are used in a variety of applications such as airborne valves, appliances, satellites and medical electronics. They are available in flat, molded-to-shape, spiral wrap, transparent, composite and high temperature configurations. Honeywell uses a variety of materials to manufacture its heaters. These include silicone, which can easily be vulcanized to metal parts; Kapton, noted for its thermal stability over a wide temperature range; as well as other flexible dielectric materials. Heaters are available with single, multiple or variable watt densities to customize heat output to unique application needs. They may also be bonded to other system parts or combined with Honeywell thermostats, thermistors, thermocouples, temperature sensors and thermal fuses to form custom-engineered heating systems. Optional PSA (Pressure Sensitive Adhesive) is available with all series. NOTE: The products in this section do not follow the "how to use this catalogue" instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information.
3100 Series Silicone Wire-wound Heaters
The 3100 Series contains resistive wire encased between two layers of fiberglass-supported silicone rubber. All bonding adhesives are uncured silicone rubber. These heaters are cured under pressure and temperature during manufacturing. The multi-stranded resistance wires allow wire-wound heaters to conform to three dimensional shapes. Optional PSA (Pressure Sensitive Adhesive) is available with all series. Maximum power: Operating/storage temperature range: Size constraints: Geometry: Heater trace pattern: 40 W/in2 250 C [482 F] max. 200 C [392 F] max. (UL) None, virtually any size and shape Specific to customer requirements Specific to customer requirements
3200 Series Silicone Chemically-etched Heaters
The 3200 Series contains resistive foil traces encased between two layers of fiberglass-supported silicone rubber. All bonding adhesives are uncured silicone rubber. These heaters are cured under pressure and temperature during their manufacturing. They are the optimal choice for multiple watt densities or varying trace geometry requirements. Maximum power: Operating/storage temperature range: Size constraints: Geometry: Heater trace pattern: 40 W/in2 250 C [482F] max. 200 C [392 F] max. (UL) 0,61 m x 0,61 m [24 in x 24 in] Specific to customer requirements Specific to customer requirements
WHITE WIRE 2 PLACES
WHITE WIRE 2 PLACES 44,6 [1.76] 152,4 [6.00] 609,6 12,7 [24.0 0.50]
25,4 [1.00] 25,4 [1.00] 609,6 12,7 [24.0 0.50] PATCH (SILICONE)
SILICONE ELEMENT SILICONE HEATER SIDE VIEW (EXPLODED)
PATCH (SILICONE)
LEADWIRES
SILICONE ELEMENT SILICONE
HEATER SIDE VIEW (EXPLODED)
LEADWIRES
SERIES NAME 3100 Silicone Wire-wound Heater
SERIES NAME 3200 Silicone Chemically-etched Heater
www.honeywell.com/sensing
37
HEATERS
3400 Series Kapton or High Temperature Insulated Heaters
The 3400 Series contains etched, resistive foil encased between two layers of Kapton. The Kapton Insulated Heaters use an acrylic thermoset bonding adhesive, while the Kapton Insulated High Temperature Heaters use a TeflonTM bonding adhesive. Insulated heaters are used in applications where thin profile and or low material outgassing are important considerations. 40 W/in2 * Kapton insulated: 177 C [350 F] max. * Kapton high temperature insulated: 260 C [500 F] max. Size constraints: 0,61 m x 0,61 m [24 in x 24 in] Geometry: Specific to customer requirements within size constraints Heater trace pattern: Specific to customer requirements Maximum power: Operating/storage temp. range:
78000 Series Transparent Heaters
The 78000 Series heater resistive element consists of a very thin layer of ITO (Indium Tin Oxide) electrically sputtered on PET polyester film. The electrical connection is made via silver ink or carbon bus bars laid on top of the ITO. Wire connections are made via ring terminals eyeleted to the silver or carbon bus bars or flexible tail/connector. Transparent heaters are used to warm liquid crystal displays (LCDs) in cold, moist environments.
Maximum power: 5 W/in2 Operating/storage temp. range: -40 C to 85 C [-40 F to 185 F] Size constraints: 0,60 m x 0,43 m [22 in x 17 in] Geometry: Specific to customer requirements within size constraints Heater trace pattern: Continuous layer of ITO (Indium Tin Oxide) evenly sputtered across entire surface
508,0 12,7 [20.00 0.50] 6,35 [0.25] 170,2 [6.70]
257,3 [10.13]
609,0 25,4 [24.0 1.0]
18,15 [0.714] 18,15 [0.714]
159,0 CLEAR [6.26] VIEW AREA
154,4 [6.08]
ADHESIVE THIS SURFACE SHRINK SLEEVE INSULATION 2 PLACES
POLYIMID E ELEMENT POLYIMIDE
ADHESIVE PATCH
14,95 [0.59] 14,95 [0.59]
212,09 CLEAR VIEW AREA [8.35] 220,98 [8.70] ADHESIVE SIDE
SERIES NAME 3400 Kapton or High Temperature Insulated Heater
SERIES NAME 78000 Transparent Heater
38
www.honeywell.com/sensing
COMBI-SENSOR
Combi-sensor
The Combi-sensor is a liquid pressure/temperature sensor that uses piezoresistive and thermistor sensing technology to measure water pressure and temperature. It is designed for use in boiler system water pressure and inflow temperature measurement applications.
Pressure range: 0 bar to 3.0 bar relative Accuracy: 2 % over full range Response time: <3 s Operating temperature: 5 C to 110 C [41 F to 203 F] Overpressure: 5 bar for 1 hour Burst pressure: 9 bar for 1 min Power supply: 5 Vdc 10 % Voltage output: 0.5 Vdc to 4.5 Vdc ratiometric to Vs Maximum current limit: 250 mA (not self-limiting) (for reverse polarity) NTC (Negative Temperature Coefficient) characteristics: 10 kOhm at 25 C 3 % beta(25/85) = 3998 K 2 % Connection: Lumberg rast 2.5 edge connector ESL code 312-600
DESCRIPTION Combi-sensor REFERENCE FS300-100
39,0 [1.54]
17,0 [0.67]
41,5 [1.66]
39,0 DIA. [1.54]
www.honeywell.com/sensing
39
THERMAL CUTOFFS
Thermal Cutoffs
Thermal Cutoffs include products for use in a wide array of small appliances, major appliances, office copy machines, automotive, and HVAC equipment. These devices are available in various lead lengths and configurations. NOTE: The products in this section do not follow the "how to use this catalogue" instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information.
NOTICE
* To maximize product life, use a 30 C [86 F] min. differential between the operating ambient temperature at the fuse location and the specified functioning temperature of the fuse being used. Maintain a 40 C [104 F] min. differential between devices with functioning temperatures above 200 C [392 F]. * Under no condition should the thermal cutoff be exposed to a continuous normal temperature rating in excess of 200 C [392 F]. Only proper testing of the above will determine the selected thermal cutoff's suitability within the application.
D Series
The D Series responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the fuse. This is accomplished when the organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit. Operating temperature range: Environmental exposure range: 72 C to 240 C [162 F to 464 F] see notice
DXXX-002
81,79 [3.220] 35,05 [1.380] 11,61 REF. [0.457] SILVER-PLATED BRASS CASE 46,74 [1.840]
TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE
3,99 [0.157] SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE
DXXX-001
64,26 [2.530] 35,05 [1.380 ] SILVER-PLATED BRASS CASE 11,61 REF. [0.457] 29,21 [1.150 ]
NAME DXXX-002
DXXX-003
69,09 [2.720] 35,05 [1.380] 11,61 REF. [0.457] SILVER-PLATED BRASS CASE 34,04 [1.340]
TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE
3,99 [0.157] SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE
TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE 3,99 [0.157] SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE
NAME DXXX-001
NAME DXXX-003
40
www.honeywell.com/sensing
THERMAL CUTOFFS
RD Series
The RD Series responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the fuse. This is accomplished when the organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit. The electrical resistance of an RD Series thermal cutoff is comparable to that found in an equal length of 18 gauge solid copper wire. With proper heat flow, heat generation below 15 A is minimal. Above 15 A, the upper limit on current capacity will depend on the environment for each specification Operating temperature range: Envirnmental exposure range: 72 C to 240 C [162 F to 464 F] see notice
RDXXX-001
NAME RDXXX-001
RDXXX-002
NAME RDXXX-002
www.honeywell.com/sensing
41
POSITION
POSITION SENSORS
Honeywell's Solid State Position Sensor family includes digital and analog Hall-effect position sensors, magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect basic switches, and magnets. Solid State Position Sensors are reliable, high speed, long life, sensors and are directly compatible with other electronic circuits. Position sensors are used in applications which require accurate, reliable outputs. They are found in brushless dc motors, utility meters, welding equipment, vending machines, home appliances, computers, etc.
Position Sensors
SS40/400 Series Hall effect digital position sensor
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar, latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. Package style: Supply voltage: Operating temperature: Radial lead IC 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F
3 (2)
Unipolar - temperature compensated
OPERATING POINT (MAXIMUM) 115 Gauss 180 Gauss 390 Gauss RELEASE POINT (MINIMUM) 20 Gauss 75 Gauss 235 Gauss REFERENCE SS441A SS443A SS449A
SS49/490 Series Ratiometric hall effect linear position sensor
Package style: Supply voltage: Operating temperature: Magnetic range: Radial lead IC 4.5 to 10.5 Vdc -40 C to 150 C -40 F to 302 F -670 to 670 Gauss
Bipolar latching- temperature compensated
OPERATING POINT (MAXIMUM) 85 Gauss 180 Gauss RELEASE POINT (MINIMUM) -85 Gauss -180 Gauss REFERENCE SS461A SS466A
OPTIONS
Temperature compensated
Gate 2X 3 2X 48 2,54 0.10 4,06 0.16 1 1,75 0.07 3,0 1.12 15,0 0.59 3x 0,76 0.03 MAX +
48 (2) 2,5 0.10 4,1 0.16 Hall element centre
3,0 0.12 14,99 0.59 0,43 (3) 0.017 0,38 (3) 0.015
-
0
1,7 0.07
0
+
_
1,3 (2) 0.05
2x
1,3 0.05
3 x 0,7 MAX 0.025 0,4 3x 0.015
OPTIONS
MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C
3,2 0.125 +
-
0
Bipolar - temperature compensated
OPERATING POINT (MAXIMUM) 60 Gauss 140 Gauss RELEASE POINT (MINIMUM) -60 Gauss -140 Gauss REFERENCE SS411A SS413A High accuracy High accuracy
PACKAGE STYLE
Surface mount Surface mount reel
REFERENCE SS495A SS495A1 SS495A1-S SS495A-SP
Bipolar - non temperature compensated
Supply voltage: Operating temperature:
OPERATING POINT (MAXIMUM) 150 Gauss RELEASE POINT (MINIMUM) -140 Gauss
4.5 to 24 Vdc -55 C to 150 C -67 F to 302 F
REFERENCE SS41
42
www.honeywell.com/sensing
POSITION SENSORS
POSITION
SS49/490 Series Ratiometric hall effect linear position sensor (Continued)
Non temperature compensated
GATE 2 X 3 2
SS500 Series Hall effect digital position sensor
Package style: Supply voltage: Operating temperature: Surface mount 3.8 to 30 Vdc -40 C to 150 C -40 F to 302 F
SS94 Series Ratiometric hall effect linear position sensor
The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. Package style: Supply voltage: Operating temperature: Magnetic range: SS94A1F Ceramic 6.6 Vdc to 12.6 Vdc -40 C to 125 C -40 F to 257 F -500 to 500 Gauss -100 to 100 Gauss
2 X 48 2 2,54 0.10 4,1 0.16
NOMINAL ( PACKAGE ( HALL ELEMENT .067 .005 MAX FLASH CATALOG LISTING
3,0 0.12 1,75 0.07 (0) 2,03 0.08 MAX
.164 .003
DATE CODE
(+)
(-)
(0)
.005 MAX 3X .016
6
+
_
2 x 1,27 0.05
0,43 3x 0.017 0,38 3 x 0.015
2X .059 .002 .173 3
3,17 0.125 +
-
0
N S
Supply voltage: Operating temperature: Magnetic range:
4 to 10 Vdc -25 C to 85 C -13 F to 185 F -1000 to 1000 Gauss
REFERENCE SS49
.177 .004
OPTIONS
MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C
Miniature Ratiometric hall effect linear position sensor
SS490 Series MRL (Miniature Ratiometric Linear) sensors have a ratiometric output voltage, set by the supply voltage. It varies in proportion to the strength of the magnetic field.
Bipolar - temperature compensated
OPERATING POINT (MAXIMUM) 60 Gauss 140 Gauss RELEASE POINT (MINIMUM) -60 Gauss -140 Gauss REFERENCE SS511AT SS513AT
OPTIONS
Temperature compensated
MAIN FEATURE General purpose High sensitivity (25 mV/Gauss output @ 8 Vdc supply) Noise shielded REFERENCE SS94A1 SS94A1F SS94A2
Temperature compensated
Gate 2X 3 2X 48 2,54 0.10 4,06 0.16 1 1,75 0.07 3,0 1.12 15,0 0.59 +
Bipolar - non temperature compensated
Supply voltage:
OPERATING POINT (MAXIMUM) 140 Gauss RELEASE POINT (MINIMUM) -140 Gauss
4,5 to 24 Vdc
REFERENCE SS51T
Unipolar - temperature compensated
OPERATING POINT (MAXIMUM) 115 Gauss 180 Gauss 390 Gauss RELEASE POINT (MINIMUM) 20 Gauss 75 Gauss 235 Gauss REFERENCE SS541AT SS543AT SS549AT
0,76 3x 0.03 MAX
-
0
2x
1,3 0.05
3 x 0,7 MAX 0.025 0,4 3x 0.015
Bipolar latching- temperature compensated
3,2 0.125 +
-
0
OPERATING POINT (MAXIMUM) 85 Gauss 180 Gauss
RELEASE POINT (MINIMUM) -85 Gauss -180 Gauss
REFERENCE SS561AT SS566AT
MAGNETIC RANGE -670 to 670 Gauss -840 to 840 Gauss
REFERENCE SS495B SS496B
www.honeywell.com/sensing
43
POSITION
POSITION SENSORS
2SS Series Magnetoresistive digital position sensor
2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. Supply voltage: Operating temperature: Maximum operating point: Minimum release point: 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F 25 Gauss 5 Gauss
SR13 Series Hall effect digital position sensor
SR13 series Hall-effect digital position sensors permit quick and easy sensor installation, with snap-in and flat mount sensor packages, and can house any of the present SS400 series sensors or any similarly sized sensing elements. Package style: Supply voltage: Operating temperature: Plastic snap-in 3.8 Vdc to 30 Vdc -40 C to 150 C -40 F to 302 F
SR16 Series Cost effective digital vane sensor
SR16 series competitively priced Hall-effect digital vane sensors contain an internal magnet and Hall effect sensor mounted in a twin tower configuration. Package style: Supply voltage: Operating temperature: Dual tower 3.8 Vdc to 30 Vdc -20 C to 85 C -4 F to 185 F
OPTIONS
Type J4
2x 5 MAX 2x 45 1,6 0.06
3,1 4,5 0.18 0.12
IC CENTER
3,1 0.12
Type J6
2SS
4,5 0.18
OPTIONS
15,0 0.59
MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 C
-O+
Unipolar
OPERATING POINT (MAXIMUM) 180 Gauss 115 Gauss 390 Gauss RELEASE POINT (MINIMUM) 75 Gauss 20 Gauss 235 Gauss REFERENCE SR13C-A1 SR13D-A1 SR13F-A1
OPTIONS
Omnipolar
PACKAGE STYLE Radial lead IC Surface Mount REFERENCE 2SS52M 2SS52M-S
Bipolar latching
OPERATING POINT (MAXIMUM) 85 Gauss RELEASE POINT (MINIMUM) -85 Gauss REFERENCE SR13R-A1
Type N
PACKAGE STYLE PCB/Molex 5557 connector Wire exit PCB mount leads
REFERENCE SR16C-J4 SR16C-J6 SR16C-N
44
www.honeywell.com/sensing
POSITION SENSORS
POSITION
SR17 Series Cost effective digital vane sensor
SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed sensing and are offered in a side-mount twin tower package. Package style: Supply voltage: Operating temperature: Side looker mounting 3.8 Vdc to 30 Vdc -20 C to 85 C -4 F to 185 F
OPTIONS
Type J6
Type J7
PACKAGE STYLE Side mount wire exit 41 in wire leads and connector
REFERENCE SR17C-J6 SR17C-J7
www.honeywell.com/sensing
45
INFRARED
INFRARED
Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic components are reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered. Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement detection and counting.
Infrared Products
Infrared emitting diodes
OPTIONS
Metal package, end-emitting Coaxial, lead case - SE1450/1470(L)
Plastic package T1, end-emitting - SEP8505/8705
Side-emitting - SEP8506/8706
Miniature pill - SE2460/2470 Side-emitting - SEP8736
TO-46, flat window - SE3455/3470
Operating temperature:
OUTPUT WAVELENGTH (nm) 935 935 880 880 BEAM ANGLE () 15 50 15 10
-40 C to 85 C (-40 F to 185 F)
POWER OUTPUT 2.0 to 4.0 mW/cm 0.33 to 0.52 mW/cm 2.7 to 7.8 mW/cm 1.7 to 3.0 mW/cm REFERENCE SEP8505-003 SEP8506-002 SEP8705-003 SEP8736-003
TO-46, dome lensed - SE5455/5470
Ceramic discrete surface mount - glass lens
Operating temperature:
OUTPUT WAVELENGTH (nm) 935 880 935 880 935 880 935 880 BEAM ANGLE () 24 24 18 18 90 90 20 20
-55 C to 125 C (-67 F to 257 F)
POWER OUTPUT 0.70 mW min. 1.10 to 4.50 mW/cm 1.00 mW min. 6.0 mW/sr min. 5.4 mW min. 10.5 mW min. 4.8 mW min. 3.5 mW/cm min. REFERENCE SE1450-003L SE1470-003L SE2460-003 SE2470-002 SE3455-004 SE3470-003 SE5455-003 SE5470-004
Note: This device can be mounted with the lens up or down, looking through PCB.
Operating temperature:
OUTPUT WAVELENGTH (NM) 880 BEAM ANGLE () 24
-55 C to 125 C (-67 F to 257 F)
POWER OUTPUT 0.60 mW/cm min. REFERENCE SME2470-021
46
www.honeywell.com/sensing
INFRARED
INFRARED
Phototransistors
OPTIONS
Metal package Coaxial, lead case - SD1440(L) Plastic package T1, end-looking - SDP8405
Side-looking- SDP8406 Miniature pill - SD2440
TO-46, flat window - SD3443 Side-looking - SDP8436
TO-46, dome lensed - SD5443
Operating temperature:
ANGULAR RESPONSE () 20 50 18
-40 C to 85 C (-40 F to 185 F)
LIGHT CURRENT MINUMUM (mA) 12.0 1.80 7.0 REFERENCE SDP8405-003 SDP8406-002 SDP8436-003
Ceramic discrete surface mount - glass lens Top-looking - SMD2420/2440
Operating temperature:
ANGULAR RESPONSE () 24 48 90 18
-55 C to 125 C (-67 F to 257 F)
LIGHT CURRENT MINUMUM (mA) 3.0 7.0 2.0 8.0 REFERENCE SD1440-003L SD2440-004 SD3443-003 SD5443-003
Note: This device can be mounted with the lens up or down, looking through PCB. Operating temperature: -55 C to 125 C (-67 F to 257 F)
ANGULAR RESPONSE () 28 LIGHT CURRENT MINUMUM (mA) 3.0 REFERENCE SMD2440-012
www.honeywell.com/sensing
47
INFRARED
INFRARED
Optoschmitt detectors
OPTIONS
Metal package TO-46, dome lensed
Encoder sensors
Operating temperature: Turn-on threshold irradiance: Supply voltage: Package style: -40 C to 85 C (-40 F to 185 F) 0.05 mW/cm to 2.0 mW/cm 4.5 Vdc to 5.5 Vdc Plastic, PC mount
OPTIONS
Side-looking - HLC2705
Operating temperature: Supply voltage: Output: Angular response:
OUTPUT LOGIC Buffer Inverter Buffer Inverter
-40 C to 100 C (-40 F to 212 F) 16.0 V 10 kOhm Pull-up 12
TURN-ON THRESHOLD IRRADIANCE 2.5 mW/cm max. 2.5 mW/cm max. 0.25 mW/cm 0.25 mW/cm REFERENCE SD5600-001 SD5610-001 SD5620-001 SD5630-001
PC mount - HOA0901/0902
Plastic package Side-looking
OUTPUT OPTION Speed and direction Direction, inverting logic Speed and direction, 2 tachometer
REFERENCE HLC2705-001 HOA0901-011 HOA0902-011
Operating temperature: Supply voltage: Output: Angular response:
OUTPUT LOGIC Buffer
-40 C to 85 C (-40 F to 185 F) 16.0 V 10 kOhm Pull-up 50
TURN-ON THRESHOLD IRRADIANCE 2.5 mW/cm max. REFERENCE SDP8600-001
NOTICE
Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
48
www.honeywell.com/sensing
INFRARED
INFRARED
Reflective sensors
OPTIONS
Metal components Converging/focused optical axis - HOA1180 HOA Series Converging/focused optical axis - HOA0149
Converging/focused optical axis - HOA2498 HOA1397
Operating temperature: Output:
-55 C to 100 C (-67 F to 212 F) Transistor
ON-STATE COLLECTOR CURRENT 0.16 mA 0.16 mA REFERENCE HOA1180-002 HOA2498-002
Converging/focused optical axis - HOA1405
Plastic package HLC1395 Series, short distance detection
Operating temperature: Output:
-40 C to 85 C (-40 F to 185 F) Transistor
ON-STATE COLLECTOR CURRENT 0.60 mA 1.00 mA 0.70 mA 0.80 mA REFERENCE HLC1395-002 HOA0149-001 HOA1397-002 HOA1405-002
Low profile
NOTICE
Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
www.honeywell.com/sensing
49
INFRARED
INFRARED
HOA1882
Aperture (emitter and detector): O 1,52 mm (0.060 in)
Transmissive sensors, Phototransistor output
OPTIONS
Metal components HOA1877
Aperture (emitter and detector): O 1,27 mm (0.050 in)
Plastic components, wire leads HOA088X/089X
Wire colour code and functions Red - IRED Anode Black - IRED Cathode White - Detector Collector Green - Detector Emitter
Operating temperature: Output:
-55 C to 100 C (-67 F to 212 F) Transistor
ON-STATE COLLECTOR CURRENT 0.1 mA REFERENCE HOA1877-001
Plastic components HOA086X/087X
HOA1870
Wire colour code and functions: Orange - IRED Anode Green - IRED Cathode Aperture (emitter and detector): White - Detector Collector Blue - Detector Emitter 0,15 mm (0.006 in) wide
HOA1879
Operating temperature: Output:
-40 C to 85 C (-40 F to 185 F) Transistor
ON-STATE COLLECTOR CURRENT 1.00 mA 0.50 mA 0.50 mA 0.50 mA 0.30 mA 0.50 mA 1.80 mA REFERENCE HOA0866-T55 HOA0870-N51 HOA0880-P51 HOA0890-L55 HOA1870-031 HOA1879-015 HOA1882-012
NOTICE
Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
Opaque housing Opaque housing
50
www.honeywell.com/sensing
INFRARED
INFRARED
Transmissive sensors, Optoschmitt output
OPTIONS
Plastic components HOA096X/097X HOA696X/697X Plastic components, integral 3 pin connector HOA7720/30
Operating temperature:
OUTPUT 10 kOhm Pull-up 10 kOhm Pull-up Open-Collector Totem-Pole Open-Collector Totem-Pole Totem-Pole Open-Collector
-40 C to 70 C (-40 F to 158 F)
OUTPUT LOGIC Buffer Buffer Inverter Inverter Buffer Buffer Inverter Inverter HYSTERESIS 10 % 10 % 5% 5% 5% 5% 5% 5% REFERENCE HOA0961-N51 HOA0971-N51 HOA6963-N51 HOA6972-N55 HOA6981-L51 HOA6990-T51 HOA7720-M22 HOA7730-M22
Opaque housing Opaque housing Opaque housing
Plastic components, wire leads HOA698X/699X
Wire colour code and functions: Red - IRED Anode Black - IRED Cathode Green - Detector Ground White - Detector Vcc Blue - Detector Output
NOTICE
Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
www.honeywell.com/sensing
51
CURRENT
CURRENT
Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current sensors. Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or regulate the amount of work being done by a machine.
Current Sensors
CSN Series Closed Loop Current Sensors
OPTIONS
Multi turn PCB mounted
Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) PCB on 13 pins
SENSED CURRENT RANGE 36 A
COIL TURNS 1000 (110 Ohm coil)
SUPPLY VOLTAGE 15 Vdc
REFERENCE CSNE151
I+ 31,8 (1.25)
DIRECTION OF CURRENT 12,7 (0.50)
Closed loop current sensors measure ac, dc and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the Hall effect principle and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor. The CSN Series has a high overload capacity, a high level of electrical insulation between primary and secondary circuits and a rapid response rate. Lightweight and compact, and with no restriction on input current waveform, the sensors are ideal for variable speed drives, power supplies, feedback control systems, robotics/welding equipment and general overcurrent protection. Sensed current type: EMC: Accuracy: ac or dc EN 50082-2, EN 50081-2 0.5 %
20,3 (0.80) -+0 O 0,80 (0.03) Secondary pin) PIN 1 I + DIRECTION OF CURRENT PIN 1 7,7 (0.27) 2,9 (0.114) 2,54 (0.100) 1,60 (0.06)
4,0 (0.16)
O 1,25 (0.05) (Primary pin)
7,75 (0.305) 9,50 (0.37) 2,54 (0.100)
SENSED CURRENT RANGE 90 A 90 A
NOMINAL CURRENT 25 A 50 A
COIL TURNS
SUPPLY VOLTAGE
REFERENCE CSNE151-100 CSNE151-200
1000 (66 Ohm coil) 12 Vdc to 15 Vdc 1000 (66 Ohm coil) 12 Vdc to 15 Vdc
52
www.honeywell.com/sensing
CURRENT
Small housed style
Housing material: Mounting: Bayblend FR 1440 (UL94-V0) PCB on 3 pins
CURRENT
Pinout style `B'
SENSED CURRENT RANGE 70 A 90 A 100 A 100 A
COIL TURNS 1000 (90 Ohm coil) 1000 (50 Ohm coil) 2000 (160 Ohm coil) 2000 (130 Ohm coil)
SUPPLY VOLTAGE 15 Vdc 13 Vdc 15 Vdc 15 Vdc
REFERENCE CSNA111 CSNC241-500 CSNB121 CSNB131
SENSED CURRENT RANGE 150 A 180 A 200 A 200 A
COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 2000 (100 Ohm coil) 1000 (30 Ohm coil)
SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc
REFERENCE CSNF161 CSNF151 CSNR151 CSNR161
Small housed family
Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) PCB on 3 pins
Pinout style `A'
SENSED CURRENT RANGE 150 A 200 A 200 A SENSED CURRENT RANGE 90 A 150 A 180 A COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 2000 (100 Ohm coil) SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 15 Vdc REFERENCE CSNP661 CSNT651 CSNG251
COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil) 1000 (30 Ohm coil)
SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc 12 to 15 Vdc
REFERENCE CSNF161-002 CSNR151-002 CSNR161-002
SENSED CURRENT RANGE 90 A 150 A
COIL TURNS 1000 (30 Ohm coil) 2000 (100 Ohm coil)
SUPPLY VOLTAGE 12 to 15 Vdc 12 to 15 Vdc
REFERENCE CSNP661-002 CSNT651-001
www.honeywell.com/sensing
53
CURRENT
CURRENT
CSN Series Closed Loop Current Sensors (Continued)
Mid range housed style
Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) Panel, spade terminals x 3
CSLA Series Open Loop Current Sensors
CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear output Hall effect transducer (LOHETTM). These sensors cover measuring ranges from 0-950 Amps. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric. Sensed current type: Housing: ac or dc PBT Polyester
OPTIONS
SENSED CURRENT RANGE 600 A 600 A (fitted with busbar) COIL TURNS 2000 (25 Ohm coil) 2000 (25 Ohm coil) SUPPLY VOLTAGE 12 to 18 Vdc 12 to 18 Vdc REFERENCE CSNJ481 CSNJ481-001
PCB bottom mount
Large housed style
Housing material: Mounting: Bayblend KU2-1468 (UL94-V0) Panel, spade terminals x 3
SENSED CURRENT RANGE 0 to 75 A 0 to 92 A 0 to 150 A 0 to 225 A 0 to 225 A 0 to 325 A 0 to 400 A SENSED CURRENT RANGE COIL TURNS 1200 A 5000 (50 Ohm coil) 1200 A (fitted with busbar) 5000 (50 Ohm coil) SUPPLY VOLTAGE 15 to 24 Vdc 15 to 24 Vdc REFERENCE CSNK591 CSNK591-001
SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc
REFERENCE CSLA1DE CSLA2DE CSLA2DG CSLA1DJ CSLA2DJ CSLA1DK CSLA2DK
54
www.honeywell.com/sensing
CURRENT
PCB bottom mount PCB side mount
CURRENT
SENSED CURRENT RANGE 45 A
SUPPLY VOLTAGE 4.5 to 10.5 Vdc
REFERENCE CSLH3A45
Digital current sensor
SENSED CURRENT RANGE 0 to 57 A 0 to 72 A 0 to 100 A 0 to 150 A
SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc 8 to 16 Vdc 8 to 16 Vdc
REFERENCE CSLA1CD CSLA2CD CSLA1CF CSLA1CH
PCB bottom mount
SENSED CURRENT RANGE 0 to 310 A 0 to 550 A 0 to 625 A 0 to 765 A 0 to 950 A
SUPPLY VOLTAGE 6 to 12 Vdc 6 to 12 Vdc 8 to 16 Vdc 6 to 12 Vdc 6 to 12 Vdc
REFERENCE CSLA2EJ CSLA2EL CSLA1EL CSLA2EM CSLA2EN
PCB side mount
OPERATE CURRENT 3.5 A.t Nominal
SUPPLY VOLTAGE 6 to 16 Vdc
REFERENCE CSDA1BC
SENSED CURRENT RANGE 0 to 57 A 0 to 72 A
SUPPLY VOLTAGE 8 to 16 Vdc 6 to 12 Vdc
REFERENCE CSLA1GD CSLA2GD
www.honeywell.com/sensing
55
LIQUID LEVEL
Liquid Level Sensors
Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital output that denotes the presence or absence of liquid. The mode of operation is derived from the principle of total internal reflection. An LED and detector are housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to escape. Thus the amount of light received by the voltage level switch is reduced and the output switches, denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for water. The LL Series is a basic component which requires external circuit protection; this protection is incorporated in the LLE Series. Housing: Termination: Supply voltage: Pressure range: Polysulphone 250 mm lead wires +5 Vdc 0 to 5 bar
LL Series
Operating temperature: Standard High temperature Storage temperature: Standard High temperature -20 C to 85 C -4 F to 185 F -40 C to 125 C -40 F to 257 F -40 C to 100 C -40 F to 212 F -50 C to 150 C -58 F to 302 F
Type 5
LLE Series
Operating temperature: Storage temperature: -25 C to 80 C -13 F to 176 F -30 C to 85 C -22 F to 185 F
High temperature
SEAL WASHER Nitrile rubber
REFERENCE LL105100
y ;
Vcc RED
VOLTAGE REGULATOR
OUTPUT GREEN SCHMITT TRIGGER
IRED
PHOTO TRANSISTOR
0V BLUE
OPTIONS OPTIONS
Type 2
19,00 (0.75)
Type 2
22,49 (0.89) 19,40 (0.76) 12,45 (0.49) 4,70 (0.19) (0.01 in 2 ) 0,22 mm 2 Tinned Ends
M12 x 1 - 8 g
High temperature
SEAL WASHER Vamac
REFERENCE LL102101
SEAL WASHER Nitrile rubber
REFERENCE LLE102000
Type 3
Type 5
(0.39 -0 O10,00
+0.004
) 16,12 (0.63) 2,3 (0.09)
+0,10 -0
Standard High temperature
SEAL WASHER Nitrile rubber Vamac
REFERENCE LL103000 LL103101 SEAL WASHER Nitrile rubber
4,1 (0.16)
(0.01 in 2 ) 0,22 mm 2 Tinned Ends
13,0 (0.51)
REFERENCE LLE105000
56
www.honeywell.com/sensing
BASIC SWITCHES
BASIC SWITCHES
These listings include standard size basics, miniature, subminiature, switches. The precision snapaction mechanisms are offered with a wide variety of actuators and operating characteristics. Basic switches are ideal for applications requiring compactness, light weight, accurate repeatability and long life. They are best used for presence/absence detection where physical contact with object is permissible. Very economical.
Basic Switches
BA/BE/BZ Series Basic Switches
BA/BE/BZ Series Standard Basic Switches are used for simple or precision on/off application needs. As well as the catalogue listings presented here, we offer other versions with higher temperature ratings, different termination options, different electrical ratings and Single Pole, Single Throw (SPST) circuitry. Refer to our website for details. Voltage: Electrical rating: Operating temperature: Termination: Contact type: Approvals: Switching options: 250 Vac 16 A -55 C to 85 C -67 F to 185 F Screw Silver CE, CSA, UL SPDT Single Pole, Double Throw
Overtravel plunger - standard
Overtravel plunger (splash resistant)
ELECTRICAL RATING 20 A
REFERENCE BZ-2RD-A2 BA-2RB-A2
Panel mount overtravel plunger
Stainless steel spring REFERENCE BZ-2RDS-A2 BZ-2RDS-A2S
Overtravel roller plunger
OPTIONS
Note: BA/BE plunger position distance from mounting hole = 19 mm (0.75 in)
Top pin plunger
ELECTRICAL RATING 20 A APPROVALS REFERENCE BZ-2RQ1-A2 BA-2RQ1-A2
DEMKO
REFERENCE BZ-2RQ18-A2
Approvals:
ELECTRICALRATING
BE-2R-A4
TERMINATION Solder Screw Solder Screw Screw
CSA, UL
REFERENCE BZ-R BZ-R-A2 BZ-R169 BZ-2R-A2 BE-2R-A4
25 A
www.honeywell.com/sensing
57
BASIC SWITCHES
BA/BE/BZ Series Basic Switches (Continued)
Overtravel roller plunger, perpendicular
DT Series Basic Switch
DT Series Standard Basic Switches consist of two independent single-pole double throw circuits in one housing actuated by one actuator. The terminals are separated by a nonconductive shield to reduce shorting. 250 Vac 10 A -55 C to 85 C -67 F to 185 F Termination: Screw Contact type: Silver Approvals: CSA, UL Switching options: DPDT Double Pole, Double Throw Voltage: Electrical rating: Operating temperature:
TB Series Miniature Double-break Basic Switch
TB Series Miniature Double-break Basic Switches are basic double-break units that offer a means of controlling isolated circuits. Each circuit may be driven by an independent voltage source. 250 Vac 10 A -55 C to 125 C -67 F to 257 F Termination: Solder Contact type: Silver Approvals: CSA, UL Switching options: (SPDT DB) Single Pole, Double Throw, Double Break Voltage: Electrical rating: Operating temperature:
REFERENCE BZ-2RQ181-A2
OPTIONS
Top pin plunger
OPTIONS
Top pin plunger
Dimensions in inches
1.825 REF 1.57 0.53 0.13 0.87 DIA HOLE IN TERMINALS (4)
Straight lever
0.50
0.20
0.24
0.15 PLASTIC PLUNGER
0.260 0.22 0.16 R 0.06 MAX PRETRAVEL 0.113 .002 DIA 0.101 - .001 0.46 OPERATING POSITION 0.312 .003 4 1 3 0.25 2 0.03 0.101 - .001 DIA HOLE
+.002 +.002
REFERENCE DT-2R-A7 ELECTRICAL RATING 20 A APPROVALS DEMKO No return spring 152,4 mm LEVER RADIUS REFERENCE
0.50
0.09
0.365
0.532 .003
BA-2RV-A2 BZ-2RW80-A2 BZ-2RW84-A2 BZ-2RW863-A2
Basic Switch Accessories
A range of accessories is available for BA, BE, BZ and DT switches, such as the 5PA2 terminal enclosure. For more information please contact your local sales office.
1.25 NOTE1 - TERMINALS 1 & 2 NORMALLY CLOSED CIRCUIT 2 - TERMINALS 3 & 4 NORMALLY OPEN CIRCUIT 3 - TERMINALS ARE PLATED FOR SOLDERING
Roller lever
REFERENCE 1TB1-2
TERMINATION LEVER RADIUS Solder Splash resistant
REFERENCE
BZ-2RW822-A2 BZ-2RW822 BZ-2RW8225551-A2 One way, BZ-2RW826-A2 32,1 mm 48,3 mm BZ-2RW82-A2
58
www.honeywell.com/sensing
BASIC SWITCHES
SM and SX Series Subminiature Basic Switches
SM and SX Series Subminiature Basic Switches are used for simple or precision on/off application needs. These switches combine small size and light weight with ample electrical capacity, precision operation and long life. The SX Series are small, precision, snap-action switches that are ideal where savings in space and weight are important. Voltage: Operating temperature: Termination: Contact type: Switching options: 250 Vac -55 C to 125 C -67 F to 257 F Solder Silver SPDT Single Pole, Double Throw
SM Series
Approvals: Ampere rating: CE, CSA, UL 5A
SX Series
Approvals: Ampere rating: CE, CSA, UL 5A
OPTIONS
Top pin plunger
OPTIONS
Top pin plunger
Approvals:
TERMINATION Quick connect
11SM601-H4
UL, CSA
REFERENCE 11SM1 11SM601-H4
Approvals:
CONTACTS Silver Silver Gold
6SX7-T
AMPERE RATING 7A 3A 1A
UL, CSA
REFERENCE 1SX1-T 11SX1-T 6SX7-T
Straight lever
Straight lever
Lever length 4,83 mm
REFERENCE 111SM1 REFERENCE 311SX2-T 311SX3-T
Roller lever
Lever length `A' 12,8 mm Lever length `A' 24,5 mm
Simulated roller
REFERENCE 111SM2-T
REFERENCE 311SX5-T
www.honeywell.com/sensing
59
BASIC SWITCHES
ZM, ZX, ZV and ZW Series Subminiature Basic Switches
ZM, ZX, ZV and ZW Series Subminiature Basic Switches are costeffective devices used for simple on/off applications. These switches combine small size and light weight with ample electrical capability and long life. Plastic lever capability is available on the ZV Series. Electrical rating: Voltage: Operating temperature: Termination: Contact type: Switching options: 0.1 A, 3 A, 5 A or 10.1 A 125/250 Vac 25 C to 85 C [-13 F to 185 F] Quick connect, solder, PCB Gold or silver SPDT
Straight lever
ZM Series
Approvals: Electrical rating: UL/CSA 0.1 A, 5 A or 10.1 A
TERMINATION Quick connect Solder ELECTRICAL RATING 5A 5A CONTACT TYPE silver silver REFERENCE ZM50E70D01 ZM50E10D01
OPTIONS
Top pin plunger
Simulated roller lever
TERMINATION Quick connect Solder PCB Solder
ELECTRICAL RATING 5A 5A 10.1 A 0.1 A
CONTACT TYPE silver silver silver gold
REFERENCE ZM50E70A01 ZM50E10A01 ZM90G20A01 ZM10B10A01
TERMINATION Quick connect Solder
ELECTRICAL RATING 5A 5A
CONTACT TYPE silver silver
REFERENCE ZM50E70E01 ZM50E10E01
60
www.honeywell.com/sensing
BASIC SWITCHES
ZX Series
Approvals: Electrical rating: UL/CSA 0.1 A or 3 A
Simulated roller lever
PT
11.8 0.465
OPTIONS
Top pin plunger
5.7 0.224 12.7 0.5 2.9 0.114
6.5 0.256
OP
0.9 0.035 5.08 0.2
6.5 0.256 5.08 0.2 12.8 0.504
3.15 0.124
1.5 0.059
2.05 0.081
1.24 0.049 5.8 0.228
0.4 0.016
FP
0.043
e2.2 e0.087
e0.081
1.1 1.1
e2.05
3.6 0.138
0.063
0.043
1.6
0.9 0.035 5.08 0.2
6.5 0.256 5.08 0.2 12.8 0.504
3.15 0.124
1.24 0.049 5.8 0.228
0.4 0.016
TERMINATION PCB Solder
ELECTRICAL RATING 3A 3A
CONTACT TYPE silver silver
REFERENCE ZX40E30E01 ZX40E10E01
ZV Series
TERMINATION PCB Solder ELECTRICAL RATING 3A 0.1 A CONTACT TYPE silver gold REFERENCE ZX40E30A01 ZX10C10A01
Approvals: Electrical rating:
UL/ENEC 0.1 A, 5 A or 10.1 A
Straight lever
12.7 0.5
13.0 0.512
OPTIONS
Top pin plunger
PT
5.7 0.224 2.9 0.114
1.5 0.059 2.05 0.081
6.5 0.256
3.4 0.134
5.2 0.205
OP
FP
1.12 0.044
0.043 0.043
e2.2 e0.087
0.9 0.035 5.08 0.2
6.5 0.256 5.08 12.8 0.504 0.2
3.15 0.124
1.24 0.049 5.8 0.228
0.4 0.016
TERMINATION PCB Solder
ELECTRICAL RATING 3A 3A
CONTACT TYPE silver silver
REFERENCE ZX40E30C01 ZX40E10C01
1.1 1.1
3.6 0.138
e2.05 e0.081
1.6 0.063
TERMINATION PCB Solder Quick connect
ELECTRICAL RATING 5A 5A 0.1 A
CONTACT TYPE silver silver gold
REFERENCE ZV50E20A01 ZV50E10A01 ZV10B70A01
0.043
e2.2 e0.087
1.1 1.1
3.6 0.138
e2.05 e0.081
www.honeywell.com/sensing
61
1.6 0.063
0.043
1.12 0.044
PT
12.7 0.5 5.2 0.205
2.9 0.114
1.5 0.059
2.05 0.081
5.7 0.224
6.5 0.256
3.4 0.134
1.12 0.044
5.2 0.205
OP
FP
BASIC SWITCHES
Straight lever
BASIC SWITCHES
ZW Sealed Series
Approvals: Electrical rating: UL/ENEC 0.1 A or 5 A
OPTIONS
Top pin plunger
TERMINATION Solder Quick connect
ELECTRICAL RATING 5A 5A
CONTACT TYPE silver silver
REFERENCE ZV50E10B01 ZV50E70C01
Roller lever
TERMINATION Solder
ELECTRICAL RATING 5A
CONTACT TYPE silver
REFERENCE ZW50F15AD1
Straight lever
TERMINATION PCB Quick connect
ELECTRICAL RATING 5A 5A
CONTACT TYPE silver silver
REFERENCE ZV50E20F01 ZV50E70F01
TERMINATION Solder
ELECTRICAL RATING 0.1 A
CONTACT TYPE gold
REFERENCE ZW10E15CD1
62
www.honeywell.com/sensing
BASIC SWITCHES
Roller lever
BASIC SWITCHES
TERMINATION Wire leads
ELECTRICAL RATING 0.1 A
CONTACT TYPE gold
REFERENCE ZW10E90FW1
www.honeywell.com/sensing
63
BASIC SWITCHES
V5 Series Miniature Basic Switches
V5 Series Basic Switches are used for simple or precision on/off, end of limit, presence/absence, pressure, temperature and manual operator interface application needs. Voltage: Operating temperature: Standard 250 Vac
Straight lever Type B
1,6 (P.T.) 22 8,1 15,3 (O.P.)
Roller lever Type D
1,6 (P.T.) 20,6 8,1 20,6 (O.P.)
-55 C to 85 C -67 F to 185 F High temperature -55 C to 150 C -67 F to 302 F Termination: 6,3 mm x 0,8 mm Quick connect (QC) Contact type: Silver/silver cadmium oxide Electrical rating: V5A 20 A V5B/P/R 16 A V5C/D 10 A V5S 22 A Switching options: SPDT Single Pole Double Throw
APPROVALS CE, CSA, ENEC, UL
REFERENCE V5C010BB3B
APPROVALS CE, CSA, ENEC, UL CE, CSA, ENEC, UL
High temperature
REFERENCE V5B210CB3D V5C010BB3D
Type C
3,2 (P.T.) 35,6 8,1 15,3 (O.P.)
Type E
3,2 (P.T.) 34
8,1 20,6 (O.P.)
OPTIONS
Top pin plunger
22,2 20,2 14,7 Operating position 2,8 O3,1
3,1 10,3
C1 NC 2 NO 4
2,8
15,9
APPROVALS CE, ENEC
High temperature
REFERENCE V5B210CB1C
APPROVALS CE, CSA, ENEC, UL CE, ENEC
Lever position 2 High temperature
REFERENCE V5A010CB4E V5B210CB1E
Type G
3,4 28,8 Lever slot position 2 4,4 Lever slot position 1
6,4 (P.T.) 59,5 8,1 15,3 (O.P.)
10,3
2,8
8,1 14,1
APPROVALS CE, ENEC CE, CSA, ENEC, UL CE, CSA, UL CE, ENEC CE, ENEC CE, ENEC CE, CSA, ENEC, UL CE, CSA, ENEC, UL CE, ENEC APPROVALS CE, ENEC CE, ENEC CE, BEAB CE, BEAB
4,8 mm x 0,5 mm QC Solder terminals High temperature 4,8 mm x 0,5 mm QC Solder terminals
REFERENCE V5A010CB V5B010CB3 V5B010FB3 V5B010TB V5B210CB V5C010BB V5C010EB3 V5C010TB3 V5P010CB REFERENCE V5D030BB V5R030CB V5S020CB V5S030CB
APPROVALS CE, ENEC
REFERENCE V5C010BB1G
SWITCHING OPTIONS SPNO SPNO SPNC SPNO
64
www.honeywell.com/sensing
BASIC SWITCHES
V7 Series Miniature Basic Switches
V5 and V7 Series Basic Switches are used for simple or precision on/off, end of limit, presence/ absence, pressure, temperature and manual operator interface application needs. The V7 Series also offers listings with Single Pole, Single Throw circuitry (available in either normally open (NO) or normally closed (NC) configurations). Refer to our website for details. -40 C to 82 C -40 F to 180 F High temperature -40 C to 200 C -40 F to 350 F Termination: Quick connect (QC) D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in) E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in) Printed circuit board (PCB) Electrical rating Contact Type V7-*A 5A Silver V7-*B 11 A Silver V7-*C/W 15 A Silver V7-*D 1A Gold alloy V7-*E 10 A Silver V7-*S 100 mA Gold alloy V7-*V 21 A Silver alloy V7-*Z 25 A Silver cadmium oxide Approvals: CSA, UL, ENEC V7-*C/D/W CSA, UL Switching options: SPDT Single Pole Double Throw Operating temperature: Standard
AVAILABLE TERMINALS
Quick Connect (QC)
OPTIONS
Top pin plunger
10,2 .40 6,4 .25
20,2 .80 2,8 .11
D8 terminals are European approved when used with electrical ratings A, B, D, E or S. International approving agencies require that switches with these terminals have insulated receptacles or connector.
10,3 .41
2,8 .11 1,0 .04 2,90 O hole (3,10/.122 option) .114 2,8 .11
NC COM NO
1,5 0.06
8,9 .35 18,2 MAX .72
2,90 .114 DIA 3,10 .122 OPT
3,20 DIA .126 3,46 .134 OPT
22,2 .88 28,8 1.14
2,4 .10 14,4 .57
0,8 (3) .03
Note: The optional mounting hole dimensions shown above are standard on V5/V7 International Series switches.
E8 terminals are European approved when used with electrical ratings A, B, D, E or S.
VOLTAGE 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 277 Vac 277 Vac 125 Vac 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac 250 Vac 250 Vac 277 Vac 277 Vac 125 Vac 250 Vac 277 Vac 277 Vac 277 Vac 277 Vac 277 Vac 125 Vac 250 Vac 250 Vac 125 Vac 125 Vac 277 Vac 277 Vac 277 Vac TERMINATION PCB REFERENCE V7-1A17D8 V7-1A17P02 V7-1B17D8 V7-1B19E9 V7-1C17D8 V7-1C17E9 V7-1C18E9 V7-1D10D8 V7-1E10D8 V7-1E17P02 V7-1E19E9 V7-1S17D8 V7-1V19E9 V7-1Z19E9 V7-2A17E9 V7-2B17D8 V7-2B17E9 V7-2B17P02 V7-2S17D8 V7-3A17D8 V7-3E10E8 V7-3E10E9 V7-3E17D8 V7-3E17E9 V7-3E19E9 V7-3S17E9 V7-4A17D8 V7-4A18E9 V7-4S17D8 V7-5D17E9 V7-6B19D8 V7-6C17D8 V7-7A19D8
PCB
E9 terminals are European approved when used with electrical ratings A, B, D, E, S, V or Z.
Printed circuit board (PO2)
PCB
These terminals interface with snap-on receptacles and other components from AMPNODU interconnection system. PCB terminals are European approved when used with electrical ratings A, B, D, E, S.
Straight lever Type -002
VOLTAGE 277 Vac 277 Vac 277 Vac 277 Vac
REFERENCE V7-1C17D8-002 V7-1C17E9-002 V7-2B17E9-002 V7-6C18D8-002
www.honeywell.com/sensing
65
BASIC SWITCHES
V7 Series Miniature Basic Switches (Continued)
Straight lever Type -022
Roller lever Type -201
VOLTAGE 277 Vac 277 Vac 125 Vac 277 Vac 125 Vac 277 Vac VOLTAGE 250 Vac 277 Vac 277 Vac 277 Vac 125 Vac 250 Vac 277 Vac 125 Vac 277 Vac 125 Vac 125 Vac REFERENCE V7-1A17D8-022 V7-1B19D8-022 V7-1C17D8-022 V7-1C18E9-022 V7-1S17D8-022 V7-2A17D8-022 V7-2B17D8-022 V7-2S17D8-022 V7-3E17E9-022 V7-3S17D8-022 V7-3S17E9-022
REFERENCE V7-1C17D8-201 V7-1C17E9-201 V7-1S17D8-201 V7-2B17D8-201 V7-2S17D8-201 V7-7B17D8-201
Type -207
Type -048
VOLTAGE 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac 277 Vac 125 Vac
REFERENCE V7-1B10E9-207 V7-1C17D8-207 V7-1C17E9-207 V7-1S17D8-207 V7-1V19E9-207 V7-2A17D8-207 V7-2B17D8-207 V7-7D17D8-207
VOLTAGE 277 Vac 277 Vac 277 Vac 277 Vac 277 Vac 125 Vac 277 Vac 250 Vac
High temperature
REFERENCE V7-1B17D8-048 V7-1C17D8-048 V7-1V19E9-048 V7-2B17D8-048 V7-2B19E9-048 V7-3S17D8-048 V7-6C18D8-048 V7-9W1AE9-048
Simulated roller lever Type -263
VOLTAGE 277 Vac 277 Vac 125 Vac 125 Vac 125 Vac 277 Vac 277 Vac
REFERENCE V7-1B17D8-263 V7-1C17D8-263 V7-1S17D8-263 V7-2S17D8-263 V7-3S17E9-263 V7-6C17D8-263 V7-7B19D8-263
66
www.honeywell.com/sensing
INDEX
Index
111-103EAJ-H01 ...................................... 22 111-104HAK-H01 ..................................... 22 111-202CAK-B01 ..................................... 22 111-202CAK-H01 ..................................... 22 111-303EAK-B01 ..................................... 22 111-802EAJ-B01 ...................................... 22 111-802EAJ-H01 ...................................... 22 111SM1 .................................................... 59 111SM2-T ................................................ 59 11SM1 ...................................................... 59 11SM601-H4 ............................................ 59 11SX1-T ................................................... 59 112-102EAJ-B01 ...................................... 21 112-103FAJ-B01 ...................................... 21 112-103FAJ-H01 ...................................... 21 112-104KAJ-B01 ...................................... 21 112-104KAJ-H01 ...................................... 21 112-105PAJ-B01 ...................................... 21 112-201BAJ-B01 ...................................... 21 112-202EAJ-B01 ...................................... 21 112-202EAJ-H01 ...................................... 21 112-203HAJ-B01 ...................................... 21 112-204KAJ-B01 ...................................... 21 112-502EAJ-B01 ...................................... 21 112-502EAJ-H01 ...................................... 21 112-503JAJ-B01 ...................................... 21 112-504NAJ-B01 ...................................... 21 112-604NAJ-H01 ...................................... 21 115-202CDK-801 ..................................... 23 115-802EDJ-801 ...................................... 23 120-102EAJ-Q01 ...................................... 22 120-103FAJ-Q01 ...................................... 22 120-104KAJ-Q01 ...................................... 22 120-202EAJ-Q01 ...................................... 22 120-502JAJ-Q01 ...................................... 22 121-102EAJ-Q01 ...................................... 22 121-103FAJ-Q01 ...................................... 22 121-104KAJ-Q01 ...................................... 22 121-105PAJ-Q01 ...................................... 22 121-106QAJ-Q01 ...................................... 22 121-202EAJ-Q01 ...................................... 22 121-202KAJ-Q01 ...................................... 22 121-502EAJ-Q01 ...................................... 22 121-502JAJ-Q01 ...................................... 22 121-504NAJ-Q01 ...................................... 22 135-102DAG-J01 ...................................... 18 135-103FAF-J01 ....................................... 18 135-103FAG-J01 ...................................... 18 135-103LAF-J01 ....................................... 18 135-103LFW-J01 ...................................... 18 135-104LAF-J01 ....................................... 18 135-104LAG-J01 ...................................... 18 135-104LFW-J01 ...................................... 18 135-105QAG-J01 ...................................... 18 135-202FAG-J01 ...................................... 18 135-203LAG-J01 ...................................... 18 135-203LFW-J01 ...................................... 18 135-204QAG-J01 ...................................... 18 135-302FAG-J01 ...................................... 18 135-303KAG-J01 ...................................... 18 135-303LFW-J01 ...................................... 18 135-502FAF-J01 ....................................... 18 135-502FAG-J01 ...................................... 18 135-503LAF-J01 ....................................... 18 135-503LAG-J01 ...................................... 18 135-503LFW-J01 ...................................... 18 135-504QAG-J01 ...................................... 18 140-102FAG-RB1 ..................................... 20 140-103LAG-RB1 ..................................... 20 140-104QAG-RB1 ..................................... 20 140-302LAG-RB1 ..................................... 20 140-501FAG-RB1 ..................................... 20 140-502LAG-RB1 ..................................... 20 140-503QAG-RB1 ..................................... 20 141PC15G .................................................. 9 142-102FAG-RB1 ..................................... 21 142-103LAG-RB1 ..................................... 21 142-104QAG-RB1 ..................................... 21 142-302LAG-RB1 ..................................... 21 142-501FAG-RB1 ..................................... 21 142-502LAG-RB1 ..................................... 21 142-503QAG-RB1 ..................................... 21 142PC01D .................................................. 9 142PC01G .................................................. 9 142PC02G .................................................. 9 142PC05D .................................................. 9 142PC05D97 .............................................. 9 142PC05G .................................................. 9 142PC15A .................................................. 9 142PC15AW95 ........................................... 9 142PC15G .................................................. 9 143-101FAG-RC1 ..................................... 20 143-102LAG-RC1 ..................................... 20 143-103QAG-RC1 ..................................... 20 143-201FAG-RC1 ..................................... 20 143-302LAG-RC1 ..................................... 20 143-303QAG-RC1 ..................................... 20 143-501FAG-RC1 ..................................... 20 143-502LAG-RC1 ..................................... 20 143-503QAG-RC1 ..................................... 20 143PC03D .................................................. 9 143PC05DW ............................................... 9 145-101FAG-RC1 ..................................... 21 145-102LAG-RC1 ..................................... 21 145-103QAG-RC1 ..................................... 21 145-201FAG-RC1 ..................................... 21 145-301FAG-RC1 ..................................... 21 145-302LAG-RC1 ..................................... 21 145-303QAG-RC1 ..................................... 21 145-501FAG-RC1 ..................................... 21 145-502LAG-RC1 ..................................... 21 145-503QAG-RC1 ..................................... 21 162PC01D .................................................. 9 163PC01D36 .............................................. 9 163PC01D48 .............................................. 9 163PC01D61 .............................................. 9 163PC01D75 .............................................. 9 164PC01D37 .............................................. 9 164PC01D76 .............................................. 9 1865-01G-L-N .......................................... 14 1865-02G-L-N .......................................... 14 1865-03G-L-N .......................................... 14 1865-04G-L-N .......................................... 14 1865-05G-L-N .......................................... 14 1865-01G-K-N .......................................... 14 1865-02G-K-N .......................................... 14 1865-03G-K-N .......................................... 14 1865-04G-K-N .......................................... 14 1865-05G-K-N .......................................... 14 192-102DET-A01. ..................................... 20 192-102DEV-A01 ..................................... 20 192-102DEW-A01 .................................... 20 192-103LET-A01 ...................................... 20 192-103LEV-A01 ...................................... 20 192-103LEW-A01 ..................................... 20 192-104QET-A01 ...................................... 20 192-104QEV-A01 ..................................... 20 192-104QEW-A01 .................................... 20 192-222LET-A01 ...................................... 20 192-222LEV-A01 ...................................... 20 192-222LEW-A01 ..................................... 20 192-302LET-A01 ...................................... 20 192-302LEV-A01 ...................................... 20 192-302LEW-A01 ..................................... 20 192-303KET-A01 ...................................... 20 192-303KEV-A01 ..................................... 20 192-303KEW-A01 .................................... 20 192-303QET-A01 ...................................... 20 192-303QEV-A01 ..................................... 20 192-303QEW-A01 .................................... 20 192-502LET-A01 ...................................... 20 192-502LEV-A01 ...................................... 20 192-502LEW-A01 ..................................... 20 192-503QET-A01 ...................................... 20 192-503QEV-A01 ..................................... 20 192-503QEW-A01 .................................... 20 195-101CAG-A01 ..................................... 19 195-102DAG-A01 ..................................... 19 195-103LAG-A01 ..................................... 19 195-104QAG-A01 ..................................... 19 195-202LAG-A01 ..................................... 19 195-203LAG-A01 ..................................... 19 195-301CAG-A01 ..................................... 19 195-302LAG-A01 ..................................... 19 195-303KAG-A01 ..................................... 19 195-501DAG-A01 ..................................... 19 195-502LAG-A01 ..................................... 19 195-503QAG-A01 ..................................... 19 197-101CAG-A01 ..................................... 19 197-102DAG-A01 ..................................... 19 197-103LAG-A01 ..................................... 19 197-104QAG-A01 ..................................... 19 197-202LAG-A01 ..................................... 19 197-203LAG-A01 ..................................... 19 197-301CAG-A01 ..................................... 19 197-302LAG-A01 ..................................... 19 197-303KAG-A01 ..................................... 19 197-501DAG-A01 ..................................... 19 197-502LAG-A01 ..................................... 19 197-503QAG-A01 ..................................... 19 198-101CAG-A01 ..................................... 19 198-102DAG-A01 ..................................... 19 198-103LAG-A01 ..................................... 19
www.honeywell.com/sensing
67
INDEX
198-104QAG-A01 ..................................... 19 198-202LAG-A01 ..................................... 19 198-203LAG-A01 ..................................... 19 198-301CAG-A01 ..................................... 19 198-302LAG-A01 ..................................... 19 198-303KAG-A01 ..................................... 19 198-501DAG-A01 ..................................... 19 198-502LAG-A01 ..................................... 19 198-503QAG-A01 ..................................... 19 199-101CAG-A01 ..................................... 19 199-102DAG-A01 ..................................... 19 199-103LAG-A01 ..................................... 19 199-104QAG-A01 ..................................... 19 199-202LAG-A01 ..................................... 19 199-203LAG-A01 ..................................... 19 199-301CAG-A01 ..................................... 19 199-302LAG-A01 ..................................... 19 199-303KAG-A01 ..................................... 19 199-501DAG-A01 ..................................... 19 199-502LAG-A01 ..................................... 19 199-503QAG-A01 ..................................... 19 1SX1-T ..................................................... 59 1TB1-2 ..................................................... 58 24PC01SMT ............................................... 5 24PC05SMT ............................................... 5 24PC15SMT ............................................... 5 24PCAFA6G ................................................ 4 24PCBFA6D ................................................ 4 24PCBFA6G ................................................ 4 24PCCFA6D ................................................ 4 24PCCFA6G ................................................ 4 24PCCFG6G ................................................ 4 24PCDFA6D ................................................ 4 24PCDFA6G ................................................ 4 24PCDFG6G ................................................ 4 24PCEFA6D ................................................ 4 24PCEFA6G ................................................ 4 24PCFFA6D ................................................ 4 24PCFFA6G ................................................ 4 26PC01SMT ............................................... 5 26PC05SMT ............................................... 5 26PC15SMT ............................................... 5 26PCAFA6D ................................................ 4 26PCAFA6G ................................................ 4 26PCAFG6G ................................................ 4 26PCBFA6D ................................................ 4 26PCBFA6G ................................................ 4 26PCCFA6D ................................................ 4 26PCCFA6G ................................................ 4 26PCCFG6G ................................................ 4 26PCDFA6D ................................................ 4 26PCDFA6G ................................................ 4 26PCDFG2G ................................................ 5 26PCFFA6G ................................................ 4 26PCFFG6G ................................................ 4 26PCFFU5G ................................................ 5 26PCGFA6D ................................................ 4 2SS52M ................................................... 44 2SS52M-S ................................................ 44 311SX2-T ................................................. 59 311SX3-T ................................................. 59 311SX5-T ................................................. 59 40PC001B1A .............................................. 8 40PC006G1A .............................................. 8 40PC015G1A .............................................. 8 40PC015V1A .............................................. 8 40PC030G1A .............................................. 8 40PC100G1A .............................................. 8 40PC150G1A .............................................. 8 40PC250G1A .............................................. 8 40PC500G1A .............................................. 8 6SX7-T ..................................................... 59 ASDX001D44R ........................................... 8 ASDX001G24R ........................................... 8 ASDX005D44R ........................................... 8 ASDX005G24R ........................................... 8 ASDX015A24R ........................................... 8 ASDX015D44R ........................................... 8 ASDX015G24R ........................................... 8 ASDX030A24R ........................................... 8 ASDX030D44R .......................................... 8 ASDX030G24R ........................................... 8 ASDX100A24R ........................................... 8 ASDX100D44R ........................................... 8 ASDX100G24R .......................................... 8 AWM2100V .............................................. 10 AWM2200V .............................................. 10 AWM2300V .............................................. 10 AWM3100V .............................................. 10 AWM3200V .............................................. 10 AWM3300V .............................................. 10 AWM42150VH .......................................... 10 AWM42300V ............................................ 10 AWM43300V ............................................ 10 AWM43600V ............................................ 10 AWM5101VN ............................................ 11 AWM5102VN ............................................ 11 AWM5104VC ............................................ 11 AWM5104VN ............................................ 11 AWM720P1 .............................................. 11 AWM92100V ............................................ 12 AWM92200V ............................................ 12 BA-2RB-A2 ............................................... 57 BA-2RQ1-A2 ............................................. 57 BA-2RV-A2 ............................................... 58 BE-2R-A4 ................................................. 57 BZ-2R-A2 ................................................. 57 BZ-2RD-A2 ............................................... 57 BZ-2RDS-A2 ............................................. 57 BZ-2RDS-A2S .......................................... 57 BZ-2RQ181-A2 ......................................... 58 BZ-2RQ18-A2 ........................................... 57 BZ-2RQ1-A2 ............................................. 57 BZ-2RW80-A2 .......................................... 58 BZ-2RW822 .............................................. 58 BZ-2RW8225551-A2 ................................ 58 BZ-2RW822-A2 ........................................ 58 BZ-2RW826-A2 ........................................ 58 BZ-2RW82-A2 .......................................... 58 BZ-2RW84-A2 .......................................... 58 BZ-2RW863-A2 ........................................ 58 BZ-R ......................................................... 57 BZ-R169 ................................................... 57 BZ-R-A2 ................................................... 57 CPCL04DFC ................................................ 5 CPCL04GFC ................................................ 5 CPCL10DF .................................................. 5 CPCL10DFC ................................................ 5 CPXL04DF .................................................. 5 CSDA1BC ................................................. 55 CSLA1CD ................................................. 55 CSLA1CF .................................................. 55 CSLA1CH ................................................. 55 CSLA1DE .................................................. 54 CSLA1DJ .................................................. 54 CSLA1DK ................................................. 54 CSLA1EL .................................................. 55 CSLA1GD ................................................. 55 CSLA2CD ................................................. 55 CSLA2DE .................................................. 54 CSLA2DG ................................................. 54 CSLA2DJ .................................................. 54 CSLA2DK ................................................. 54 CSLA2EJ .................................................. 55 CSLA2EL .................................................. 55 CSLA2EM ................................................. 55 CSLA2EN .................................................. 55 CSLA2GD ................................................. 55 CSLH3A45 ................................................ 55 CSNA111 .................................................. 53 CSNB121 .................................................. 53 CSNB131 .................................................. 53 CSNC241-500 .......................................... 53 CSNE151 .................................................. 52 CSNE151-100 ........................................... 52 CSNE151-200 ........................................... 52 CSNF151 .................................................. 53 CSNF161 .................................................. 53 CSNF161-002 ........................................... 53 CSNG251 .................................................. 53 CSNJ481 .................................................. 54 CSNJ481-001 ........................................... 54 CSNK591 .................................................. 54 CSNK591-001 .......................................... 54 CSNP661 .................................................. 53 CSNP661-002 .......................................... 53 CSNR151 .................................................. 53 CSNR151-002 .......................................... 53 CSNR161 .................................................. 53 CSNR161-002 .......................................... 53 CSNT651 .................................................. 53 CSNT651-001 ........................................... 53 DC001NDC4 ............................................... 6 DC005NDR4 ............................................... 6 DCXL01DN ................................................. 6 DCXL10DN ................................................. 6 DT-2R-A7 .................................................. 58 DUXL01D .................................................... 6 DUXL10D .................................................... 6 DXXX-001 ................................................ 40 DXXX-002 ................................................ 40 DXXX-003 ................................................ 40 FS300-100 ................................................ 39 FSG15N1A ................................................ 13 FSL05N2C ................................................ 13 Heaters 3100 Silcone Wire-wound ...................... 37 3200 Silicone Chemically-etched ............ 37 3400 Kapton or High Temperature .......... 38 78000 Transparent .................................. 38 HEL-700-T-0-A ......................................... 16 HEL-700-T-0-B ......................................... 16
68
www.honeywell.com/sensing
INDEX
HEL-700-T-1-A ......................................... 16 HEL-700-T-1-B ......................................... 16 HEL-700-U-0-A ......................................... 16 HEL-700-U-0-B ......................................... 16 HEL-700-U-0-C ......................................... 16 HEL-700-U-1-A ......................................... 16 HEL-700-U-1-B ......................................... 16 HEL-700-U-1-C ......................................... 16 HEL-705-T-0-12-00 .................................. 17 HEL-705-T-1-12-00 .................................. 17 HEL-705-U-0-12-00 .................................. 17 HEL-705-U-1-12-00 .................................. 17 HEL-707-T-0-12-00 .................................. 17 HEL-707-T-1-12-00 .................................. 17 HEL-707-U-0-12-00 .................................. 17 HEL-707-U-1-12-00 .................................. 17 HEL-711-T-0-12-00 .................................. 17 HEL-711-T-1-12-00 .................................. 17 HEL-711-U-0-12-00 .................................. 17 HEL-711-U-1-12-00 .................................. 17 HEL-712-T-0-12-00 .................................. 17 HEL-712-T-1-12-00 .................................. 17 HEL-712-U-0-12-00 .................................. 17 HEL-712-U-1-12-00 .................................. 17 HEL-716-T-0-12-00 .................................. 17 HEL-716-T-1-12-00 .................................. 17 HEL-716-U-0-12-00 .................................. 17 HEL-716-U-1-12-00 .................................. 17 HEL-716-U-1-12-C2 ................................. 17 HEL-717-T-0-12-00 .................................. 17 HEL-717-T-1-12-00 .................................. 17 HEL-717-U-0-12-00 .................................. 17 HEL-717-U-1-12-00 .................................. 17 HIH-3602-A .............................................. 15 HIH-3602-C .............................................. 15 HIH-3602-L ............................................... 15 HIH-3610-001 ........................................... 15 HIH-3610-002 ........................................... 15 HIH-3610-003 ........................................... 15 HIH-3610-004 ........................................... 15 HLC1395-002 ........................................... 49 HLC2705-001 ........................................... 48 HOA0149-001 ........................................... 49 HOA0866-T55 ........................................... 50 HOA0870-N51 .......................................... 50 HOA0880-P51 .......................................... 50 HOA0890-L55 ........................................... 50 HOA0901-011 ........................................... 48 HOA0902-011 ........................................... 48 HOA0961-N51 .......................................... 51 HOA0971-N51 .......................................... 51 HOA1180-002 ........................................... 49 HOA1397-002 ........................................... 49 HOA1405-002 ........................................... 49 HOA1870-031 ........................................... 50 HOA1877-001 ........................................... 50 HOA1879-015 ........................................... 50 HOA1882-012 ........................................... 50 HOA2498-002 ........................................... 49 HOA6963-N51 .......................................... 51 HOA6972-N55 .......................................... 51 HOA6981-L51 ........................................... 51 HOA6990-T51 ........................................... 51 HOA7720-M22 .......................................... 51 HOA7730-M22 .......................................... 51 ICL1010002-01 ........................................ 23 ICL1010004-01 ........................................ 23 ICL1210005-01 ........................................ 23 ICL1220002-01 ........................................ 23 ICL122R508-01 ....................................... 23 ICL1240002-01 ....................................... 23 ICL1250002-01 ....................................... 23 ICL1510006-01 ....................................... 23 ICL1512004-01 ....................................... 23 ICL1516004-01 ....................................... 23 ICL1522102-01 ....................................... 23 ICL152R508-01 ....................................... 23 ICL155R006-01 ....................................... 23 ICL155R007-01 ....................................... 23 ICL1580003-01 ....................................... 23 ICL2210008-01 ....................................... 23 ICL2212103-01 ....................................... 23 ICL221R020-01 ....................................... 23 ICL222R018-01 ....................................... 23 ICL222R515-01 ....................................... 23 ICL32OR530-01 ....................................... 23 ICL321R030-01 ....................................... 23 LL102101 ................................................ 56 LL103000 ................................................ 56 LL103101 ................................................ 56 LL105100 ................................................ 56 LLE102000 .............................................. 56 LLE105000 .............................................. 56 RDXXX-001 ............................................. 41 RDXXX-002 ............................................. 41 SD1440-003L .......................................... 47 SD2440-004 ............................................ 47 SD3443-003 ............................................ 47 SD5443-003 ............................................ 47 SD5600-001 ............................................ 48 SD5610-001 ............................................ 48 SD5620-001 ............................................ 48 SD5630-001 ............................................ 48 SDP8405-003 .......................................... 47 SDP8406-002 .......................................... 47 SDP8436-003 .......................................... 47 SDP8600-001 .......................................... 48 SE1450-003L .......................................... 46 SE1470-003L .......................................... 46 SE2460-003 ............................................ 46 SE2470-002 ............................................ 46 SE3455-004 ............................................ 46 SE3470-003 ............................................ 46 SE5455-003 ............................................ 46 SE5470-004 ............................................ 46 SEP8505-003 .......................................... 46 SEP8506-002 .......................................... 46 SEP8705-003 .......................................... 46 SEP8736-003 .......................................... 46 SMD2440-012 ......................................... 47 SME2470-021 ......................................... 46 SR13C-A1 ............................................... 44 SR13D-A1 ............................................... 44 SR13F-A1 ................................................ 44 SR13R-A1 ............................................... 44 SR16C-J4 ................................................ 44 SR16C-J6 ................................................. 44 SR16C-N .................................................. 44 SR17C-J6 ................................................. 45 SR17C-J7 ................................................. 45 SS41 ........................................................ 42 SS411A .................................................... 42 SS413A .................................................... 42 SS441A .................................................... 42 SS443A .................................................... 42 SS449A .................................................... 42 SS461A .................................................... 42 SS466A .................................................... 42 SS49 ........................................................ 43 SS495A .................................................... 42 SS495A1 .................................................. 42 SS495A1-S .............................................. 42 SS495A-SP .............................................. 42 SS495B .................................................... 43 SS496B .................................................... 43 SS511AT .................................................. 43 SS513AT .................................................. 43 SS51T ...................................................... 43 SS541AT .................................................. 43 SS543AT .................................................. 43 SS549AT .................................................. 43 SS561AT .................................................. 43 SS566AT .................................................. 43 SS94A1 .................................................... 43 SS94A1F .................................................. 43 SS94A2 .................................................... 43 TD4A ........................................................ 17 TD5A ........................................................ 17 Temperature - Probes Air Conditioning ..................................... 25 Air/Gas ................................................... 26 Earth Return (Ground) ............................ 25 ES110 Inlet Air ....................................... 24 ES120 Coolant/Oil .................................. 24 Immersion .............................................. 26 Refrigerant .............................................. 25 Surface ................................................... 25 Thermostats - Commercial 2450A Heat Detection ............................. 29 2450CM Ceramic Manual Reset .............. 28 2450HR Phenolic Automatic Reset ......... 27 2450R Fully Sealed ................................. 30 2450R Phenolic Annular Automatic Reset .... 30 2450R Phenolic Automatic Reset ............ 27 2450R Phenolic "One-shot" 1/2 in ........... 29 2450R Protected ..................................... 30 2450RC Ceramic Automatic Reset .......... 28 2450RCH Ceramic Automatic Reset ........ 28 2450RCH Ceramic "One-shot" 1/2 in ........ 29 2455A Heat Detection ............................. 29 2455R Phenolic Automatic Reset ............ 27 2455R Phenolic "One-shot" 1/2 in .......... 29 2455R Protected ..................................... 30 2455RBV Overmolded Automatic Reset .. 29 2455RC Ceramic Automatic Reset .......... 28 2455RC Ceramic "One-shot" 1/2 in ......... 29 2455RM Phenolic Manual Reset ............. 28 Thermostats - Precision 3000 Custom-packaged .......................... 33 3100 Hermetic ........................................ 31 3100U Hermetic ...................................... 31 3100UX Hermetic ................................... 31
www.honeywell.com/sensing
69
INDEX
3106 Hermetic ........................................ 31 3150 Low Silhouette Hermetic ................ 32 3150U Low Silhouette Hermetic ............. 32 3150UX Low Silhouette Hermetic ........... 32 3156 Low Silhouette Hermetic ................ 32 3156U Low Silhouette Hermetic ............. 32 3450CM Ceramic Manual Reset .............. 35 3450HR Phenolic Automatic Reset ......... 34 3450R Phenolic Automatic Reset ............ 34 3450R Phenolic "One-shot" 1/2 in ........... 36 3450RC Ceramic Automatic Reset .......... 34 3450RC Ceramic "One-shot" 1/2 in .......... 36 3450RCH Ceramic Automatic Reset ........ 34 3450RCH Ceramic "One-shot" 1/2 in ....... 36 3455R Phenolic Automatic Reset ............ 34 3455R Phenolic "One-shot" 1/2 in .......... 36 3455RBV Overmolded Automatic Reset .. 35 3455RC Ceramic Automatic Reset .......... 34 3455RC Ceramic "One-shot" 1/2 in .............. 36 3455RM Phenolic Manual Reset ............. 35 3800 Industrial Grade ............................. 32 V5A010CB ................................................ 64 V5A010CB4E ............................................ 64 V5B010CB3 .............................................. 64 V5B010FB3 .............................................. 64 V5B010TB ................................................ 64 V5B210CB ................................................ 64 V5B210CB1C ........................................... 64 V5B210CB1E ............................................ 64 V5B210CB3D ........................................... 64 V5C010BB ................................................ 64 V5C010BB1G ........................................... 64 V5C010BB3B ........................................... 64 V5C010BB3D ........................................... 64 V5C010EB3 .............................................. 64 V5C010TB3 .............................................. 64 V5D030BB ................................................ 64 V5P010CB ................................................ 64 V5R030CB ................................................ 64 V5S020CB ................................................ 64 V5S030CB ................................................ 64 V7-1A17D8 ............................................... 65 V7-1A17D8-022 ....................................... 66 V7-1A17P02 ............................................. 65 V7-1B10E9-207 ........................................ 66 V7-1B17D8 ............................................... 65 V7-1B17D8-048 ....................................... 66 V7-1B17D8-263 ....................................... 66 V7-1B19D8-022 ....................................... 66 V7-1B19E9 ............................................... 65 V7-1C17D8 ............................................... 65 V7-1C17D8-002 ....................................... 65 V7-1C17D8-022 ....................................... 66 V7-1C17D8-048 ....................................... 66 V7-1C17D8-201 ....................................... 66 V7-1C17D8-207 ....................................... 66 V7-1C17D8-263 ....................................... 66 V7-1C17E9 ............................................... 65 V7-1C17E9-002 ........................................ 65 V7-1C17E9-201 ........................................ 66 V7-1C17E9-207 ........................................ 66 V7-1C18E9 ............................................... 65 V7-1C18E9-022 ........................................ 66 V7-1D10D8 ............................................... 65 V7-1E10D8 ............................................... 65 V7-1E17P02 ............................................. 65 V7-1E19E9 ............................................... 65 V7-1S17D8 ............................................... 65 V7-1S17D8-022 ....................................... 66 V7-1S17D8-201 ....................................... 66 V7-1S17D8-207 ....................................... 66 V7-1S17D8-263 ....................................... 66 V7-1V19E9 ............................................... 65 V7-1V19E9-048 ........................................ 66 V7-1V19E9-207 ........................................ 66 V7-1Z19E9 ............................................... 65 V7-2A17D8-022 ....................................... 66 V7-2A17D8-207 ....................................... 66 V7-2A17E9 ............................................... 65 V7-2B17D8 ............................................... 65 V7-2B17D8-022 ....................................... 66 V7-2B17D8-048 ....................................... 66 V7-2B17D8-201 ....................................... 66 V7-2B17D8-207 ....................................... 66 V7-2B17E9 ............................................... 65 V7-2B17E9-002 ........................................ 65 V7-2B17P02 ............................................. 65 V7-2B19E9-048 ........................................ 66 V7-2S17D8 ............................................... 65 V7-2S17D8-022 ....................................... 66 V7-2S17D8-201 ....................................... 66 V7-2S17D8-263 ....................................... 66 V7-3A17D8 ............................................... 65 V7-3E10E8 ............................................... 65 V7-3E10E9 ............................................... 65 V7-3E17D8 ............................................... 65 V7-3E17E9 ............................................... 65 V7-3E17E9-022 ........................................ 66 V7-3E19E9 ............................................... 65 V7-3S17D8-022 ....................................... 66 V7-3S17D8-048 ....................................... 66 V7-3S17E9 ............................................... 65 V7-3S17E9-022 ........................................ 66 V7-3S17E9-263 ........................................ 66 V7-4A17D8 ............................................... 65 V7-4A18E9 ............................................... 65 V7-4S17D8 ............................................... 65 V7-5D17E9 ............................................... 65 V7-6B19D8 ............................................... 65 V7-6C17D8 ............................................... 65 V7-6C17D8-263 ....................................... 66 V7-6C18D8-002 ....................................... 65 V7-6C18D8-048 ....................................... 66 V7-7A19D8 ............................................... 65 V7-7B17D8-201 ....................................... 66 V7-7B19D8-263 ....................................... 66 V7-7D17D8-207 ....................................... 66 V7-9W1AE9-048 ...................................... 66 XCA415AN ................................................. 7 XCX01DNC ................................................. 7 XCX01DNH ................................................. 7 XCX15DNC ................................................. 7 XPC01DFC .................................................. 7 XPC15DTC ................................................. 7 XSXL04GF .................................................. 7 ZM10B10A01 ........................................... 60 ZM50E10A01 ............................................ 60 ZM50E10D01 ............................................ 60 ZM50E10E01 ............................................ 60 ZM50E70A01 ............................................ 60 ZM50E70D01 ............................................ 60 ZM50E70E01 ............................................ 60 ZM90G20A01 ........................................... 60 ZV10B70A01 ............................................ 61 ZV50E10A01 ............................................ 61 ZV50E10B01 ............................................ 62 ZV50E20A01 ............................................ 61 ZV50E20F01 ............................................. 62 ZV50E70C01 ............................................ 62 ZV50E70F01 ............................................. 62 ZW10E15CD1 ........................................... 62 ZW10E90FW1 ........................................... 63 ZW50F15AD1 ........................................... 62 ZX10C10A01 ............................................ 61 ZX40E10C01 ............................................ 61 ZX40E10E01 ............................................. 61 ZX40E30A01 ............................................ 61 ZX40E30C01 ............................................ 61 ZX40E30E01 ............................................. 61
70
www.honeywell.com/sensing
Inside back cover - blank
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
Sales and Service
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor, contact your local sales office or: INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com
ASIA PACIFIC
Control Products Asia Pacific Headquarters Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Australia Honeywell Limited Phone: +(61) 2-9370-4500 FAX: +(61) 2-9370-4525 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 China - PRC - Beijing Honeywell China Inc. Phone: +(86-10) 8458-3280 Fax: +(86-10) 8458-3102 China - PRC - Shanghai Honeywell China Inc. Phone: (86-21) 6237-0237 Fax: (86-21) 6237-1237 China - Hong Kong S.A.R. Honeywell Ltd. Phone: +(852) 2953-6412 Fax: +(852) 2953-6767 Indonesia Honeywell Indonesia Pte Ltd. Phone: +(62) 21-535-8833 FAX: +(62) 21-5367 1008 India TATA Honeywell Ltd. Phone: +(91) 20 6870 445/ 446 Fax: +(91) 20 681 2243/ 687 5992 Japan Honeywell Inc Phone: +(81) 3 5440 1425 Fax: +(81) 3 5440 1368
South Korea Honeywell Korea Co Ltd Phone: +(822) 799-6167 Fax: +(822) 792-9013 Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) 7958-4988 Fax: +(60-3) 7958-8922 New Zealand Honeywell Limited Phone: +(64-9) 623-5050 Fax: +(64-9) 623-5060 Toll Free (0800) 202-088 Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) 636-1661/ 1662 Fax: +(63-2) 638-4013 Singapore Honeywell South East Asia Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) 693-3099 FAX: +(662) 693-3085 Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) 2245-1000 FAX: +(886-2) 2245-3241
EUROPE
Austria Honeywell Austria GmbH Phone: +(43) 1 727 80 366/ 246 FAX: +(43) 1 727 80 337 Belgium Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502 Bulgaria Honeywell EOOD Phone: +(359) 2 979 00 23 FAX: +(359) 2 979 00 24 Czech Republic Honeywell spol. s.r.o. Phone: +(420) 242 442 111 FAX: +(420) 242 442 182 Denmark Honeywell A/S Phone: +(45) 39 55 55 55 FAX: +(45) 39 55 55 58 Finland Honeywell OY Phone: +(358) 9 3480101 FAX: +(358) 9 34801375 France Honeywell SA Phone: +(33) 1 60 19 80 40 FAX: +(33) 1 60 19 81 73 Germany Honeywell AG Phone: +(49) 69 8064 444 FAX: +(49) 69 8064 442 Hungary Honeywell Kft. Phone: +(361) 451 43 00 FAX: +(361) 451 43 43
Italy Honeywell S.p.A. Phone: +(39) 02 92146 450/ 456 FAX: +(39) 02 92146 490 The Netherlands Honeywell B.V. Phone: +(31) 20 565 69 11 FAX: +(31) 20 565 66 00 Norway Honeywell A/S Phone: +(47) 66 76 20 00 FAX: +(47) 66 76 20 90 Poland Honeywell Sp. zo.o Phone: +(48) 606 09 64 FAX: +(48) 606 09 01 Portugal Honeywell Portugal Lda Phone: +(351 21) 424 50 00 FAX: +(351 21) 424 50 99 Romania Honeywell Bucharest Phone: +(40) 21 231 64 37/ 38 FAX: +(40) 21 231 6439 Commonwealth of Independent States (CIS) Z.A.O. Honeywell Phone: +(7 095) 796 98 36 FAX: +(7 095) 797 99 06 Slovak Republic Honeywell s.r.o. Phone: +(421 2) 58 247 403 FAX: +(421 2) 58 247 415 South Africa (Republic of) Honeywell Southern Africa Honeywell S.A. Pty. Ltd Phone: +(27) 11 695 8000 FAX +(27) 11 805 1504
Spain Honeywell S.A. Phone: +(34) 91 313 6100 FAX: +(34) 91 313 6129 Sweden Honeywell AB Phone: +(46) 8 775 55 00 FAX: +(46) 8 775 56 00 Switzerland Honeywell AG Phone: +(41) 1 855 24 40 FAX: +(41) 1 855 24 45 Turkey Honeywell Turkey A.S. Phone: +(90) 216 5756620 FAX: +(90) 216 5756637 Ukraine Honeywell Phone: +(380) 44 201 44 74 FAX: +(380) 44 201 44 75 United Kingdom Honeywell Control Systems Ltd Phone: +(44) 1698 481481 FAX: +(44) 1698 481676 Mediterranean & African Distributors Honeywell SpA Phone: +(39) 2 921 46 232 FAX: +(39) 2 921 46 233 Middle East Headquarters Honeywell Middle East Ltd. Phone: +(9712) 443 2119 FAX +(9712) 443 2536
LATIN AMERICA
Honeywell Latin America Headquarters Phone: 1-305-805-8188 FAX: 1-305-883-8257 Argentina Honeywell S.A.I.C. Phone: +(54-11) 4383-3637 FAX: +(54-11) 4325-6470 Brazil Honeywell Do Brasil & Cia Phone: +(55-11) 4166-1900 FAX: +(55-11) 4166-1901 Chile Honeywell Chile, S.A. Phone: +(56-2) 425-8400 FAX: +(56-2) 425-8410 Mexico Honeywell S.A. de C.V. Phone: +(52) 55 5081-0200 FAX: +(52) 55 5081-0202 Puerto Rico, Caribbean Honeywell Inc. Phone: +(787) 792-7075 FAX: +(787) 792-0053 Venezuela Honeywell C.A. Phone: +(58-212) 273-0511 FAX: +(58-212) 273-0599
NORTH AMERICA
USA/Canada Honeywell Sensing and Control Phone: 1-800-537-6945 1-815-235-6847 FAX: 1-815-235-6545 E-mail: info.sc@honeywell.com
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer's responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request. Copyright 2004 Honeywell International Inc. All Rights Reserved.
Sensing and Control www.honeywell.com/sensing NewhouseIndustrialEstate MotherwellML15SB Scotland,UK
100455-EN Issue 2 2/04 UK07 GLO Printed on environmentally friendly paper.
Spine Layout:
Commercial Switches and Sensors
Issue 2/February 2004

▲Up To Search▲

Price & Availability of 112-102EAJ-B01

	To Download 112-102EAJ-B01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .